Temperature

SENSORS & PROBES

AO-KLT/A Duct Air quality sensor for mixed gas (VOC) and temperature

Fuehler Systeme

AO-KLT/A

€335.00

0...100% mixed gas VOC Output Type : 0-10 V or 4-20 mA automatic re-calibration

View

SENSORS & PROBES

Probes-OQ610 Combination Temperature Probes for Oven OQ610

Grant Instruments

Probes-OQ610

€195.00

Combined Probes:◆ 3 Cable Lengths of each Model.◆ Can be used as a Magnetic Air Probe, Magnetic Surface Probe, Clamp Air Probe or Clamp Surface Probe.

CAP-K-G Clamp type Temperature sensor for Air (up to 250ºC)

SENSORS & PROBES

CAP-K-G Clamp type Temperature sensor for Air (up to 250ºC)

Grant Instruments

CAP-K-G

€585.00

CLAMP AIR PROBE Grant manufactures a comprehensive range of robust, high quality temperature probes with a choice of sensor and in a variety of physical styles for use with Squirrel data loggers. In addition to the standard range of temperature probes Grant is able to customise probes for special applications. Grant is able to supply humidity probes and...

View

MF1921G iButton Temperature Logger, water resistant according to IPX8

INSIDE & OUTSIDE USE

DS1921-WP iButton Waterproof Temperature Logger Series according to IPX8

iButton

DS1921-WP

€59.00

Thermochron iButtons labeled with “WP” (water-proof) are an enhanced version of the iButton® temperature loggers in terms of their protection level.These iButtons provide effective protection against moisture, various chemicals, and aresuitable for continuous submersion.The protection level complies with IPX8 according to DIN EN60529. See the DS1921G

SRH1A Humidity and Temperature Sensor SDI12

SRH1A Humidity and Temperature Sensor SDI12 2

SENSORS & PROBES

SRH1A Humidity and Temperature Sensor with SDI-12

PM Ecology

SRH1A

€269.00

The SRH1A Humidity and Temperature Sensor is a highly accurate and cost effective probe with robust POM-C enclosure. It has been prepared for outdoor and indoor environments. Can be used with Wind2measure RADIO Data Logger or integrated with other manufacturers’ equipment.

T3511P Web sensor - compressed air remote thermometer hygrometer with Ethernet interface

INSIDE & OUTSIDE USE

T3511P Web sensor - compressed air remote thermometer hygrometer with Ethernet interface

Comet System

T3511P

€435.00

Humidity and temperature Transmitter, Humidity, temperature probe on a cable.T+RH probe made of hard anodized duralumin for compressed air measurements up to 25 bars on cable. The Measured values are also converted to other humidity interpretation data: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. The...

U3631M IoT Wireless T/Rel. Humidity Datalogger with connector for other temperature probes (built-in GSM modem)

U3631M IoT Wireless T/Rel. Humidity Datalogger with connector for other temperature probes (built-in GSM modem) 2

INSIDE & OUTSIDE USE

U3631M IoT T/Rel. Humidity GSM Datalogger with connector for other temp. probes

Comet System

U3631M

€540.00

This GSM datalogger is designed to record the temperature and humidity from built-in sensors and temperature from an external probe.In case of exceeding the set limits, SMS and JSON messages can be sent out via a GPRS data connection.The measured values can be sent to the internet storage "COMET Cloud", which is a complete monitoring, alarm and analysis...

MF1921H iButton Temperature Logger, water resistant according to IPX8

MF1921H iButton Temperature Logger, water resistant according to IPX8 2

INSIDE & OUTSIDE USE

MF1921H iButton Temperature Logger (+15 to +46ºC, 2K), water resistant according to IPX8

iButton

MF1921H

€56.00

Regarding the protection class, the MF1921H is an improved version of the DS1921H Temperature Logger iButton.

MF1921Z iButton Temperature Logger, water resistant according to IPX8

MF1921Z iButton Temperature Logger, water resistant according to IPX8 2

INSIDE & OUTSIDE USE

MF1921Z iButton Temperature Logger (-5°C to +26°C, 2K), water resistant according to IPX8

iButton

MF1921Z

€56.00

Regarding the protection class, the MF1921Z is an improved version of the DS1921Z Temperature Logger iButton.

MF1922L iButton Temperature Logger (-40°C/+85°C, 8K), water resistant according to IPX8

INSIDE & OUTSIDE USE

MF1922L iButton Temperature Logger (-40°C/+85°C, 8K), water resistant according to IPX8

iButton

MF1922L

€109.00

Regarding the protection class, the MF1922L is an improved version of the DS1922L Temperature Logger iButton.

DS1925L High-Capacity iButton Temperature Logger (-40°C to + 85°C and 122KB memory)

INSIDE & OUTSIDE USE

DS1925L High-Capacity iButton Temperature Logger (-40°C to + 85°C and 122KB memory)

iButton

DS1925L

€95.00

MF1925L iButton Temperature Logger (-40°C to + 85°C,122KB), water resistant according to IPX8

INSIDE & OUTSIDE USE

MF1925L iButton Temperature Logger (-40°C to + 85°C,122KB), water resistant according...

iButton

MF1925L

€104.00

Regarding the protection class, the MF1925L is an improved version of the DS1925L Temperature Logger iButton

3200R1 WatchDog Wireless Rain+ Temp Station

3200R1 WatchDog Wireless Rain+ Temp Station 2

COMPACT STATIONS & KITS

3200R1 WatchDog Wireless Rain+ Temp Station (SigFox)

Spectrum Technologies

3200R1

View

SENSORS & PROBES

Tempmate-M1-200010 External Temperature Sensor for Tempmate-M1

Tempmate

Tempmate-M1-200010

€19.00

External NTC temperature sensor for tempmate-M1 devices.

SENSORS & PROBES

6310 Digital Long-Stem Soil Thermometer

Spectrum Technologies

6310

6310 Long Stem Soil Thermometer - Digital meter, Long-Stem (model 6310)- Extended 8 in (20 cm) stem- Measures from -58° to 302°F (-50°C to 150°C)- Accuracy ± 1.8°C

View

HD2127.2 Portable Thermometer (-200ºC ÷ +650ºC) with Data Logger

SENSORS & PROBES

HD2127.2 Portable Thermometer (-200ºC ÷ +650ºC) with Data Logger

SENSECA (Delta Ohm)

HD2127.2

View

SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC)

ACCESORIES

SPT10G Combined Conductivity (500μS/cm to 200mS/cm) & Temperature Probe (0ºC-80ºC)

SENSECA (Delta Ohm)

SPT10G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10.

View

SENSORS & PROBES

SPT86 4-electrode combined Conductivity & Temperature probe with Pt100 sensor.

SENSECA (Delta Ohm)

SPT86

- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.

View

SPT1G Combined Conductivity and Temperature Probe

ACCESORIES

SPT1G Combined Conductivity and Temperature Probe

SENSECA (Delta Ohm)

SPT1G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1.

View

ACCESORIES

SPT01G Combined Conductivity and Temperature Probe

SENSECA (Delta Ohm)

SPT01G

Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1

View

SENSORS & PROBES

SFT Heat Flux Sensor for Soil

Nesa srl

SFT

€660.00

Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.

W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox

INSIDE & OUTSIDE USE

W8810 IoT Wireless Temperature and CO2 Sensor, powered by Sigfox

Comet System

W8810

€465.00

The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision

FS4083 Multi-sensor Version with Display

SENSORS & PROBES

FS4083 Multisensor for CO2, VOC, Temperature and Humidity (0-10V) for Indoor Use.

Fuehler Systeme

FS4083

€532.00

0-2000/5000/10000 ppm mixed gas VOC temperature, humidity 0-10 V, relay LCD-Display

SD-TEMP-P-06 Temperature sensor for pipes

SD-TEMP-P-06 Temperature sensor for pipes 2

SENSORS & PROBES

SD-TEMP Temperature sensor for pipes & walls

Onset

SD-TEMP

€88.00

Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls

Showing 313-336 of 451 item(s)