- Inicio
- Quem somos
- Produtos
-
Marcas
-
Produtos por Medida
- Analisadores Vibração
- Bombas Peristálticas
- Fluxo de Ar
- CO Monóxido Carbono
- Contadores Geiger
- Destiladores
- Espectrofotometria
- Esterilização
- Fluorescência
- GEOTECNICS
- Umidade do Solo
- Índice de área foliar
- Chuva (pluviométrico)
- Meteorologia
- Nível de Água
- O2 oxigênio
- pH
- Pressão Diferencial
- Radiação
- Salinidade/Condutivid.
- Telemetria
- Velocidade do Ar
- Umidade Relativa
- Veterinary
- PILHAS DE COMBUSTÍVEL
- Analisadores de Redes
- Calibradores
- CAUDAL DE ÁGUA
- Cor / Colorímetro
- Contadores Partículas
- Direçao Vento
- Espectrometria
- Evapotranspiração
- Fotossíntese
- Rachaduras edifícios
- Inspeção de Tubos
- Luz Quântica
- Movimento e GPS
- Nível de diesel
- Oxigênio Dissolvido DO
- Pressão Atmosférica
- Radon
- Savia/Fluxo de Savia
- Temperatura
Monóxido de Carbono Analisador de gás SMR52
O Analisador de Gás de Monóxido de Carbono é conectado diretamente via interface de comunicação RS485, fornecendo dados de processo simples, confiáveis e econômicos com capacidades de monitoramento remoto, calibração, configuração e diagnóstico. A carcaça do Medidor de Gás de Monóxido de Carbono em um invólucro resistente à prova de IP68, cabo de resistência à tração de 1000 N, transmissão de dados digital até 1,2 km, Analisador de Gás CO ou Medidor de Gás CO é idealmente usado na indústria de água / esgoto
■ Robust IP68 Water Submersible Enclosure, Solution Without Cabinet
■ 1 sec On-line Realtime Measurement
■ 0.05W Ultra Low Power Consumption, Ideal for Outdoor Applications
■ Temperature Compensation
■ High Reliability, Drift Free
■ Lightening and Surge Protection for Power and RS485 Communication
■ 1.2 Km RS485 Digital Communication, Minimize Cabling and Engineering Cost
■ Software Configuration Calibration and Data Monitoring
■ Onboard memory allowing users to easily calibrate and configure sensor at lab and distribute to various fields sites
■ Standard Modbus RTU Protocol, Direct Connected with PLC, HMI, Eliminate I/O Module Cost
| Type | Catalytic bead sensor |
| Measurement range | 0~1,000 ppm |
| Accuracy | ±2% FS |
| Resolution | 1 ppm |
| Repeatability | ±1% FS |
| Operating temperature | -40 ~ 85 °C |
| Response time | 15 secs |
| Protection | IP68 |
| Temperature sensor | pt100 |
| Temperature measurement range | 0 ~ 85 °C |
| Temperature accuracy | ±0.5°C |
| Sensor Housing | POM; SS316L; Titanium |
| Dimension | Φ 40Χ 120 mm |
| Weight | analyzer: approx.500 g (POM); 900 g (SS316L); 800 g (Titanium) cable: 80 g/m |
Aplicação típica
| Type | Applications | Measurements | Order Selections |
| A | Source Water (River, Reservoir) |
Pressure Level pH Temperature Conductivity Dissolved Oxygen Turbidity Nitrate (NO3- ) Ammonium (NH4+) Chloride (CL-) Nitrite (NO2-) |
SMR01 SMR02 SMR04 SMR06 SMR07 SMR09 SMR10 SMR21 SMR23 SMR27 SMR28 |
| B | Ground Water | Pressure Level pH Temperature Conductivity |
SMR01 SMR02 SMR04 SMR06 SMR07 |
| C | Water Treatment | Pressure Level Free Chlorine pH Conductivity TDS Turbidity Salinity Differential Pressure |
SMR01 SMR02 SMR03 SMR04 SMR07 SMR08 SMR10 SMR11 SMR14 |
| D | Water Distribution | Pressure Level Free Chlorine pH Temperature Conductivity TDS Turbidity |
SMR01 SMR02 SMR03 SMR04 SMR06 SMR07 SMR08 SMR10 |
| E | Wastewater Effulence | Level pH Temperature Conductivity Dissolved Oxygen Suspended Solid Nitrate (NO3-) Chloride (CL-) |
SMR02 SMR04 SMR06 SMR07 SMR09 SMR12 SMR21 SMR27 |
| F | Fisheries, Aquarium and Aquaculture | Level pH Temperature Dissolved Oxygen Turbidity Salinity Level Free Chlorine ORP Temperature Nitrate (NO3-) Ammonium (NH4 |
SMR02 SMR04 SMR06 SMR09 SMR10 SMR11 SMR02 SMR03 SMR05 SMR06 SMR21 SMR23 |
| G | Factory, Commercial Building | Conductivity TDS Humidity and Temperature Differential Pressure |
SMR07 SMR08 SMR13 SMR14 |
| H | Weather | Humidity Barometer Wind Speed and direction |
SMR13 SMR15 SMR24 |
| I | Environment I (Strain, Landslide, Level) |
Rain Gauge Pyranometer Level (water pressure) Vibration Wire Input Noise |
SMR29 SMR30 SMR02 SMR19 SMR26 |
| PAD01 | IP 67 Handheld Multiparameter Water Quality Meter |
| FDC1 | IP68 Field Display, 1 SMR Sensor input) |
| HMI1 | IP66 Display Controller Logger, 2 SMR Sensor inputs |
| HMI2 | IP66 Display Controller Logger, 4 SMR Sensor inputs |
| HMI3 | IP66 Display Controller Logger, 8 SMR Sensor inputs |
| SFC01 | Flow Chamber (SMR04/05/07/08/09/10/11/12/21/23/27/32/33/34/39/40/41) |
| SFC02 | Flow Chamber (SMR43/44/45/46) |
| BOX01 | RS485 hub(4 ports) |
| BOX02 | RS485 hub(8 ports) |
| CAB12 | IP68 2 ports RS485 cable |