Ningún producto
Estos precios se entienden sin IVA
T-VER-971BP-200
Nuevo
Grupo 3
Disponible el:
Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions.
Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 logger. When using a U12 logger, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-1).
Note: For measurements larger than 120A the device must be powered by a minimum of 15V to maintain expected accuracy.
Environment:
The T-VER-971BP-200 Sensor is for use in Indoor environments
Measurements:
The T-VER-971BP-200 Sensor supports the following measurements: DC Current
Amperios DC (bi-polar) |
Measurement range: +/- 2 to +/- 200 (via span adjust) |
Accuracy (below 100A span): +/- .5 A |
Accuracy (above 100A span): +/- .5% full scale |
Sensor supply: 12 - 24 DC (15 VDC min. for currents > 120 A), 35 mA no-load to 110 mA at 200 A current |
Isolation: 600 VAC rms |
Operating temperature range: -30 to 60C (-22 to 140F) |
Humidity range: 10 - 90% non-condensing |
Response time: 2 sec. |
Output: (bi-polar) 4 - 20mA |
Dimensions: 3.1x2.8x1.4 in. (79x70x36 mm) |
Weight: 5.25 oz. |
Sensor opening: 1.1x.9 in. (28x23 mm) |
LED indications: single green blink=Norm, double green=Over Span, red+green=Over Limit, solid red=overload |
CE, UL |
S-FS-CVIA para uso con HOBO H22-001
Cable-4-20mA para uso con HOBO U12-006/008 y UX120-006M (requiere AC-SENS-1)
139,00 €
139,00 €
279,00 €
139,00 €
318,00 €
449,00 €
1 275,00 €
175,00 €
165,00 €
550,00 €
550,00 €
430,00 €
59,00 €
85,00 €
105,00 €
130,00 €
259,00 €
170,00 €
265,00 €
225,00 €
195,00 €
185,00 €
1 025,00 €
1 025,00 €
625,00 €
625,00 €
625,00 €
769,00 €