SENSORS FOR WEATHER STATIONS SMR12 Suspended Solids Density Analyzer Aquas Inc. SMR12 Suspended Solids Density Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities. View
SENSORS & PROBES SMR10 Turbidity Analyzer for Water Quality Aquas Inc. SMR10 The SMR10 turbidity analyzer is a sophisticated sensor that uses a built-in LED light source to emit a beam of 880nm.After the beam is scattered by suspended solids in the sample, the signal intensity is measured by the detector to measure the turbidity concentration of the sample.Since the LED emits 880nm near-infrared, it will not be affected by the... View
SENSORS & PROBES SMR21 Submersible Water Quality Optical Nitrate (NO3-N) Analyzer Aquas Inc. SMR21 Nitrate Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities.The Nitrate Meter housing in a robust IP68 proof enclosure, 1000 N tensile strength cable, up to 1.2 km digital data transmission, the Nitrate NO3-N... View
SENSORS & PROBES Multiparameter Water Quality Analyzer ART1 Aquas Inc. ART1 The ART multiparameter water quality analyzer is designed especially for drinking and pure water monitoring such as free chlorine, pH, ORP, conductivity, turbidity, temperature... etc.The analyzer provides real-time, simple, reliable, cost-efficient measurements with remote monitoring, configuration and diagnostics capabilities.It is ideally installed in... View
SENSORS & PROBES DC2 Circumference Dendrometer 2 (for Diameters +5 cm) Ecomatik DC2 This sensor is discontinued, we recommend the DC3 version improved. The elastic force of the sensor is not applied in tangential, but in radial direction View
Pot-Tech Electronics LHS-X-18X18-XX Linear Displacement Transducer Pot-Tech Electronics PVT LTD LHS-X-18X18-XX - Non Contact Linear Position Sensor based on Hall Effect Tenology.- Accurate Linearity upto 1% F.S. or 0.5% F.S (on request)- Inbuild signal conditioner for 0-10Vdc output / 4-20mA output.- Extremely Long Life.- Extremely Compact in Size.- Short Circuit, Overvoltage and Reverse polarity protected. View
Pot-Tech Electronics DWLT-X Draw Wire Linear Transducer Pot-Tech Electronics PVT LTD DWLT-X - Draw wire Linear Transducer (DWDT) Is a Linear Distance Measuring Transducer for a Travel upto 1500mm.- Due to Flexibility of the Wire the product is more adorable for application with long stroke measurement.- DWDT- X has a Flexibility to have a contactless absolute Hall’s magnetic encoder (for maximum 150mm length) or Muliturn potentiometer attached... View
Pot-Tech Electronics GTS-DO Speed and Direction Sensor Pot-Tech Electronics PVT LTD GTS-DO €39.00 - Speed and Direction sensor is based on magnetic Hall's effect Technology.- GTS-DO is Dual Output Magnetic Proximity sensor such that channel A lags or leads Channel B if used along with a gear wheel. Add to cart
Pot-Tech Electronics RSSK-12 Rotary Sensor Kit Pot-Tech Electronics PVT LTD RSSK-12 - Non Contact Rotary Position Sensor based on Hall Effect Tenology- Accurate Linearity upto 1% F.S. or 0.5% F.S (on request)- Extremely Long Life.- Extremely Compact in Size.- Angle programmable based on customer specific requirement- Short Circuit Protected. ( For 5Vdc and PWM output versions).- Overvoltage protected. ( For 5Vdc and PWM output... View
Pot-Tech Electronics RHSS-48 Rotary Rugged Sensor Pot-Tech Electronics PVT LTD RHSS-48 - Rotary Rugged Sensor is a transducer to detect the angle / speed of the system which correspondence to the rotary motion of the shaft. - Rotary Rugged Sensor is based on contactless Magnetic technology and hence has a very long life- This Transducer can be customised in several ways to have different Electrical angle, Voltage Output, Current Output,... View
RST Instruments Fully Grouted Multi-Point Piezometer String EL380012 RST Instruments EL380012 The piezometer cable allows multiple piezometers to be installed simply and reliably in a single well. The piezometer string and slurry tubing are placed in the well and cement and bentonite slurry is pumped until the well is filled. View