MX2203 DataLogger Bluetooth HOBO TidbiT de Temperatura sumergible hasta 120m

MX2203

Onset

Nuevo

Grupo 1

icon-app-store.png   en_app_rgb_wo_60.png

El registrador de temperatura de agua HOBO MX2203 TidbiT aprovecha la potencia de la BLE (Low Energy de Bluetooth) para entregar mediciones de temperatura de alta precisión directamente a su dispositivo móvil iOS o Android. Diseñado para la durabilidad, este registrador resistente al agua es ideal para despliegues a largo plazo en arroyos, lagos y océanos. La recolección de datos en el campo nunca ha sido tan fácil!

¿COMPRAS POR CANTIDAD, O SOLO QUIERES INFORMACIÓN ADICIONAL?
Llama al +34 916292106 o completa nuestro formulario de "Consulta este Producto"

155,00 €

sin IVA

Número de Canales 1 canal (temperatura)
Nº Bits ADC 16 bit
Precisión ±0.25°C
Resolución 0.01°C
Con Display No
Clasificación IP IP67
Comunicaciones Bluetooth BLE
Duración Batería 2 años
Capacidad Memoria 96,000 medidas

Funciones destacadas

  • Configuración inalámbrica conveniente y descarga a través de Bluetooth Low Energy (BLE)
  • La memoria grande almacena 98.000 mediciones
  • Impermeable a 120 metros (400 pies)
  • Batería reemplazable por el usuario
  • La bota impermeable protege al registrador durante el despliegue
  • La alarma LED le avisa cuando la temperatura excede el umbral establecido
  • La característica de detección de agua conserva la vida de la batería
  • Funciona con la aplicación HOBOmobile gratuita de Onset
  • ± 0.2 ° C (± 0.36 ° F) de precisión


¿En qué entorno funciona este registrador de datos?
Este registrador de datos funciona en entornos interiores, exteriores y submarinos.

¿Qué medidas soporta este registrador de datos?
El registrador de datos MX2203 admite las siguientes medidas: Temperatura y Temp. de agua

Sensor Temperatura (MX2203 and MX2204)

Rango

MX2203: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water

MX2204: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water, maximum sustained temperature in water 30°C (86°F)

Precisión

±0.25°C from -20° to 0°C (±.45°F from -4° to 32°F)

±0.2°C from 0° to 70°C (±0.36°F from 32° to 158°F)

Resolution

0.01°C (0.018°F)

Drift

<0.1°C (0.18°F) per year

Response Time

MX2203: 17 minutes typical to 90% in air moving 1 m/s, unmounted;

7 minutes typical to 90% in stirred water, unmounted

MX2204: 15 minutes typical to 90% in air moving 1 m/s, unmounted;

4 minutes typical to 90% in stirred water, unmounted

 

Data Logger

Radio Power

1 mW (0 dBm)

Transmission Range

Approximately 30.5 m (100 ft) line-of-sight

Wireless Data Standard

Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)

Logger Operating Range

-20° to 70°C (-4° to 158°F)

Logging Rate

1 second to 18 hours

Buoyancy (Fresh Water)

MX2203: 3.1 g (0.11 oz) negative

MX2204: 7.6 g (0.27 oz) negative

Waterproof

MX2203: To 122 m (400 ft)

MX2204: To 1,524 m (5,000 ft)

Water Detection

Water conductivity level of 100 µS/cm or greater necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected.

The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C (32°F).

Memory

96,000 measurements

Battery

CR2477 3V lithium, user replaceable in MX2303, non-replaceable in MX2304

Battery Life

3 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off disabled in software.

5 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off or Bluetooth Off Water Detect enabled in software.

Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.

To ensure proper battery installation, see Battery Information for detailed instructions on replacing the battery in the MX2203 logger.

Time Accuracy

± 1 minute per month at 25°C (77°F)

Full Memory Dowload

Approximately 45 seconds; may take longer the farther the device is from the logger

Wetted Materials

MX2303: Polypropylene case, EPDM O-ring, stainless steel screws, Santoprene® (TPE) boot

MX2304: Epoxy case, Santoprene (TPE) boot

Dimensiones

MX2203: 4.45 x 7.32 x 3.58 cm (1.75 x 2.88 x 1.41 inches)

MX2204: 4.06 x 6.99 x 3.51 cm (1.6 x 2.75 x 1.38 inches)

Peso

MX2203: 36.2 g (1.28 oz)

MX2204: 32.8 g (1.16 oz)

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

VER WEBINAR:

30 otros productos en la misma categoría:

Los clientes que compraron este producto también han comprado...