- Inicio
- Quiénes Somos
- Productos
-
Marcas
-
Productos por Medida
- Analizador Vibración
- Bombas Peristálticas
- Caudal de Aire
- CO Monóxido Carbono
- Contador Geiger
- Destiladores
- Espectrofotometría
- Esterilización
- Fluorescencia
- Geotécnica
- Humedad del Suelo
- Índice de área foliar
- Lluvia (Pluviómetro)
- Meteorología
- Nivel de Agua
- O2 oxígeno
- pH
- Presión Diferencial
- Radiación
- Salinidad/Conductiv.
- Telemetría
- Velocidad de Aire
- HUMEDAD RELATIVA
- Veterinaria
- PILAS DE COMBUSTIBLE
- Analizadores de Red
- Calibradores
- Caudal de Agua
- Color/Colorímetro
- Contadores Partículas
- Dirección del Viento
- Espectrometría
- Evapotranspiración
- Fotosíntesis
- Grietas en Edificios
- Inspección Tuberías
- Luz Cuántica
- Movimiento y GPS
- Nivel Gasoil
- Oxígeno Disuelto DO
- Presión Atmosférica
- Radón
- Savia/Flujo de Savia
- Temperatura
- CALIDAD DEL AIRE
- Amoníaco
- Clorofila
- Conductividad Suelo
- Dendrómetros
- Electroquímica
- Espectroradiometría
- Farmacia y Medicina
- GAS (ANALIZADORES)
- Humedad de Hoja
- Idc (Corriente DC)
- KW & KW/H
- Luz PAR
- Nitrato
- Ocupación y Tiempo
- Particulas Aire
- Potencial Hídrico
- Pulsos
- Sabor/Gusto/Acidez
- Sodio
- Turbidez
- VOC
CR-2 Higrómetro para Aeronaves
Benefits of the CR-2
• Wide Range: down to -100 °C (15 ppb)
• Fast Response Time: typically 10-20 seconds
• Inherent Stability and Accuracy
• NIST-traceable
• Very Low Maintenance
The CR-2 exhibits the same wide range, fast response and high reliability as the CR-1A, but it is designed specifically for aircraft and similar high-stress applications. Instead of using Liquid Nitrogen (LN2), mirror cooling is accomplished using a tactical cryocooler, which is a high-tech device used primarily to cool IR detectors in missiles and tank turrets to LN2 temperatures.
Maintenance requirements for the CR-2 are minimal. Aside from occasional mirror cleaning, the cryocooler needs to be renewed every 10,000 hours of use. Both the control circuitry and the sensing assembly are mounted together into a single compact unit. A separate display module is provided that displays the dew / frost point and housekeeping signals. (For aircraft operation, the display module is not required.)
The CR-2 include a ±0.1% accuracy pressure transducer, essential in demanding applications for compensating the dew/frost point temperature for minute differences between sample chamber pressure and atmospheric pressure.
CR-2 Hygrometer Specifications
| Measurement Range | ||
| Dew / frost point temperature | -100 to +30°C | |
| Lowest Concentration ppbv | 15 | |
| Reading Accuracy °C | ||
| Entire Range | ±0.1°C | |
| Concentration | ±2% | |
| Typical Response Time | 10-20 seconds | |
| Operating Range | ||
| Temperature | -40 to +60°C | |
| Pressure, psia (bar) | 5 to 30 psia (0.3 to 2 bar) | |
| Air / Gas flow range | 0.2 to 3 liters/min | |
| Altitude | 0 to 25 km | |
| Cooling Mechanism | Stirling Cycle Cryocooler | |
| Power Requirements | ||
| Standard | 28 vdc, < 50 W | |
| Optional | 115-220 vac, 50-400Hz, < 50 W | |
| Outputs | 0-10V, 4-20mA, Alarm, RS-232 |
- ---- INSTRUMENTACIÓN DE MEDIDA ----
- Calibradores Humedad