- Inicio
- Quem somos
- Produtos
-
Marcas
-
Produtos por Medida
- Analisadores Vibração
- Bombas Peristálticas
- Fluxo de Ar
- CO Monóxido Carbono
- Contadores Geiger
- Destiladores
- Espectrofotometria
- Esterilização
- Fluorescência
- GEOTECNICS
- Umidade do Solo
- Índice de área foliar
- Chuva (pluviométrico)
- Meteorologia
- Nível de Água
- O2 oxigênio
- pH
- Pressão Diferencial
- Radiação
- Salinidade/Condutivid.
- Telemetria
- Velocidade do Ar
- Umidade Relativa
- Veterinary
- PILHAS DE COMBUSTÍVEL
- Analisadores de Redes
- Calibradores
- CAUDAL DE ÁGUA
- Cor / Colorímetro
- Contadores Partículas
- Direçao Vento
- Espectrometria
- Evapotranspiração
- Fotossíntese
- Rachaduras edifícios
- Inspeção de Tubos
- Luz Quântica
- Movimento e GPS
- Nível de diesel
- Oxigênio Dissolvido DO
- Pressão Atmosférica
- Radon
- Savia/Fluxo de Savia
- Temperatura
CR-2 Higrómetro para Aeronaves
Benefits of the CR-2
• Wide Range: down to -100 °C (15 ppb)
• Fast Response Time: typically 10-20 seconds
• Inherent Stability and Accuracy
• NIST-traceable
• Very Low Maintenance
The CR-2 exhibits the same wide range, fast response and high reliability as the CR-1A, but it is designed specifically for aircraft and similar high-stress applications. Instead of using Liquid Nitrogen (LN2), mirror cooling is accomplished using a tactical cryocooler, which is a high-tech device used primarily to cool IR detectors in missiles and tank turrets to LN2 temperatures.
Maintenance requirements for the CR-2 are minimal. Aside from occasional mirror cleaning, the cryocooler needs to be renewed every 10,000 hours of use. Both the control circuitry and the sensing assembly are mounted together into a single compact unit. A separate display module is provided that displays the dew / frost point and housekeeping signals. (For aircraft operation, the display module is not required.)
The CR-2 include a ±0.1% accuracy pressure transducer, essential in demanding applications for compensating the dew/frost point temperature for minute differences between sample chamber pressure and atmospheric pressure.
CR-2 Hygrometer Specifications
| Measurement Range | ||
| Dew / frost point temperature | -100 to +30°C | |
| Lowest Concentration ppbv | 15 | |
| Reading Accuracy °C | ||
| Entire Range | ±0.1°C | |
| Concentration | ±2% | |
| Typical Response Time | 10-20 seconds | |
| Operating Range | ||
| Temperature | -40 to +60°C | |
| Pressure, psia (bar) | 5 to 30 psia (0.3 to 2 bar) | |
| Air / Gas flow range | 0.2 to 3 liters/min | |
| Altitude | 0 to 25 km | |
| Cooling Mechanism | Stirling Cycle Cryocooler | |
| Power Requirements | ||
| Standard | 28 vdc, < 50 W | |
| Optional | 115-220 vac, 50-400Hz, < 50 W | |
| Outputs | 0-10V, 4-20mA, Alarm, RS-232 |
- INSTRUMENTOS DE MEDIÇÃO E CALIBRAÇÃO
- Calibradores de Umidade