Catalog
Loading...
fuentes RSS
No RSS feed added
Rectilinear displacement transducer with ball tip.► The PY2-C-025, linear position transducer, with useful electrical stroke of 25mm, allows the position detection of moving mechanical parts.► The technology adopted to transduce the position measurement is POTENTIOMETRIC and of military origin, where a resistive track and collector are electrically...
Rectilinear displacement transducer with cylindrical case- Provided with 3x0.25 three-pin PVC cable- Cable lenght: three meters- 25mm useful electrical stroke- Fixing on brackets, selfaligning ball-joints or flange- IP65 sealing
◆ Internal wire linear deformation◆ Peak acceleration, biaxial incline◆ Internal MEMS three axis accelerometer ◆ Powered by onboard photovoltaic panel◆ Internal safety battery for a virtual unlimited life.◆ IP67 sealing.
WCH4 is an innovative modular wireless instrument for cross-hole tests on foundation poles. The cross-hole is a method to analyze the foundation poles of buildings that, with the use of ultra-sounds, crosshole, allow to carry out an accurate high resolution test. An ultra-sonic wave is sent from a transmitter to a receiver, which are convoyed...
Georesistivimeter for quadrupole measurements
STRENGTHS:► Parallelization of measurements for pole-dipole, pole-pole, dipole-dipole and three-dimensional configurations► 24-bit resolution► Pseudosection in real time ► Allows VES and tomography surveys.
The X824S is a top-range seismograph equipped with 24 to 96 embedded channels for both active and passive seismic surveys. The basic configuration starts with 24 channels and can be expanded in 24-channel increments, up to a maximum of 96 integrated channels, without requiring external boxes. The instrument features a built-in PC with a 10” monitor...
ST3 integrates within an acquisition board equipped with 3 channels with 24 bit resolution for each channel and a 3D sensor with geophones with a natural frequency of 2 Hz.The instrument is managed via a laptop or tablet PC connected to the instrumentation via a USB connection.
■ FOUNDATION TEST GAUGE ■ Based on the Sonic Echo Principle - Meets ASTM Standard D5882- Based on the Sonic Echo Principle- Measure the depth and integrity of shafts and piles.- Ideal for testing cell tower foundations.