Catalog
Loading...
fuentes RSS
No RSS feed added
The RSTAR Array Radio Series uses wireless technology to provide automated data acquisition. * Fully compatible with RST “DT Series” Data Loggers. * Excellent Hub – Node range (up to 14 km in open country). * Ultra-low quiescent power. RSTAR Nodes powered by a single lithium cell which provides years of battery life. * Simple star routing – no...
Metodology: Ground thermal conductivityTCR24 is designed to measure soil heat transmission (soil tendency to transmit heat).This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. 2 years warranty.Measurement can be done on site...
It can be used for ultrasonic distance measuring, mainly applied to measure the distance of urban road planning, construction sites, industrial spots, etc.
It can be used for ultrasonic distance measuring, main apply to measure the distance of urban road planning, construction site, industrial spot, etc.
Dynamic surveys on structures Seismic vibration monitoring
The AO-HT-192 laser distance meter (100m measurement range) is a laser distance meter with a measurement range of 0.05-100 meters, distance accuracy of ± 3.0mm, functions that help to work like calculate area , volume.
- Battery powered for remote sites. - Compatibility with all VW sensors – excluding those with auto resonant circuitry. - 4MB memory. - 100 year memory backup. - Option for radio antenna for incorporation into an RSTAR system or DT LINK. - 16 bit analog/digital converter. - Weather resistant NEMA 4X (IP66) enclosure. - 0.01µs vibrating...
RST VW2100 Vibrating Wire Piezometer has been designed to be embedded in earth fills and concrete or inserted into boreholes and pipes as small as 19 mm (3/4 inch) in diameter. RST VW2100-DP Vibrating Wire Piezometer is designed to be driven into unconsolidated fine grain material such as sand, clay, or silt.
The piezometer cable allows multiple piezometers to be installed simply and reliably in a single well. The piezometer string and slurry tubing are placed in the well and cement and bentonite slurry is pumped until the well is filled.
◆ Maximum flexibility in connecting the system◆ 4 dielectrically isolated ground subsystem◆ Straightforward setup, easy to connect via USB cable
LI19 is a high accuracy handheld read-out unit / datalogger.It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors.LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery life...
In a single device the possibility of performing 3 different types of tests! - Kit CONTACT for sonic and ultrasonic measurements on concrete specimens, walls, stone materials. - Kit MCHA for checking posts and diaphragms. - Kit P.I.T for Pile Integrity Test through vibrational methods such as Echo test and admittance The ALL1.V1 replaces the previous...
RKL-01 Submersible Liquid Level Transmitter is with stainless steel isolation diaphragm diffusion silicon pressure core body. * High accuracy, High sensitivity * Fast response * Good stability * Strong resistance to interface * Anti-corrosion material optional * Low temperature drift * Wide Temperature Range Compensation
The new standard in lateral deformation monitoring
Measuring the radon concentration in the soil is straightforward. The measurement is carried out with our detectors as an accredited service with a measurement interval of 1 to 7 days and can be carried out at any time of the year, as long as the ground is free of frost and it has not previously rained. The analysis is performed by our laboratory and the...
- Ready to deploy, with pre-attached sensors- Easy config. & data offload with free HOBOconnect app- Durable TEROS-10 soil moisture sensor (>10 years)- For use in both mineral soils and soilless media- Sturdy, sharp stainless-steel spikes for easy installation- Option to view data in Percent of Field Capacity In what environment does this data...
- 4 channels Wireless Smart Datalogger- Up to 4 inputs for vibrating wires (500÷4000 Hz) and up to 2 transducer temperatures- Respectively configurable inputs (2+2, 3+1, 4+0)- Type "C" lithium internal battery for a battery life up to 4 years with 4 vibrating wires and samples every 60 minutes- IP 65 sealing.
2 channels Wireless Smart Datalogger with Uniaxial Inclinometer.Rotation around the orthogonal axis to the support face.Rotation around the horizontal axis, parallel to the support face.