Catalog
Loading...
fuentes RSS
No RSS feed added
High Precision Hydrometer Radar and long range: 20 meters
LR High Precision Hydrometer Radar "
High Precision Hydrometer Radar and long range: 35 meters - IP68
DIN rail module for signals conversion at high-resolution (18-bit): accepts Pt100, thermopiles, voltages (micro voltage 0÷100mV) and currents or digital signals (frequency or counts) as input, and generates an output signal normalized as: 0÷2Vdc, 0÷20mA, 4÷20mA, RS485, Modbus RS485 serial.Includes a programming interface and a software that allows the...
Ca Calcium Standard solution 2000ppm, 6 x 14 ml
Heated Rain gauge (max 150W) in accordance to WMO norms Class A according to UNI 11452:2012.
The ultrasonic anemometer, developed to measure wind conditions without moving parts.
- Highest precision GHI measurements and lowest uncertainty with Class A pyranometer- DNI measurement with <5% uncertainty.- No solar tracker required- MODBUS 485 RTU digital output for DNI, GHI, DHI
Measures incident and transmitted PAR in canopies Direct display of Leaf Area Index (LAI) Usable in cloudy and clear conditions Proven, research-grade canopy analyser Ideal for phenotyping applications
Analyses Hemispherical Images Calculates canopy structure parameters and solar radiation indices Predicts radiation levels beneath canopy The HemiView canopy image analysis system provides the hardware and software needed to acquire and analyse hemispherical images of forest canopies and woodland canopies.
Combined conductivity and temperature probe with 2 stainless steel AISI316 electrodes, cell constant 0.01.Probe measuring range 0.04...20μS, 0 ... 120°C.
Industrial conductivity probe in glass with 2 platinum electrodes, S7 - PG13.5 connector, cell constant K = 1, temperature working range 0... 100°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C.
- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1
- Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar.
Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.
DURTOX - IP65 plastic box4-20mA detectors by electrochemical technology for the detection of oxygen and the various toxic gases:CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2DURTOX-X - ATEX Explosion Proof Box (LOM 10ATEX2076 Certif.)Models for the following gases: CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2.