Catalog
Loading...
fuentes RSS
No RSS feed added
The ART multiparameter water quality analyzer is designed especially for drinking and pure water monitoring such as free chlorine, pH, ORP, conductivity, turbidity, temperature... etc.The analyzer provides real-time, simple, reliable, cost-efficient measurements with remote monitoring, configuration and diagnostics capabilities.It is ideally installed in...
This sensor is discontinued, we recommend the DC3 version improved. The elastic force of the sensor is not applied in tangential, but in radial direction
- Non Contact Linear Position Sensor based on Hall Effect Tenology.- Accurate Linearity upto 1% F.S. or 0.5% F.S (on request)- Inbuild signal conditioner for 0-10Vdc output / 4-20mA output.- Extremely Long Life.- Extremely Compact in Size.- Short Circuit, Overvoltage and Reverse polarity protected.
- Draw wire Linear Transducer (DWDT) Is a Linear Distance Measuring Transducer for a Travel upto 1500mm.- Due to Flexibility of the Wire the product is more adorable for application with long stroke measurement.- DWDT- X has a Flexibility to have a contactless absolute Hall’s magnetic encoder (for maximum 150mm length) or Muliturn potentiometer attached...
- Speed and Direction sensor is based on magnetic Hall's effect Technology.- GTS-DO is Dual Output Magnetic Proximity sensor such that channel A lags or leads Channel B if used along with a gear wheel.
- Non Contact Rotary Position Sensor based on Hall Effect Tenology- Accurate Linearity upto 1% F.S. or 0.5% F.S (on request)- Extremely Long Life.- Extremely Compact in Size.- Angle programmable based on customer specific requirement- Short Circuit Protected. ( For 5Vdc and PWM output versions).- Overvoltage protected. ( For 5Vdc and PWM output...
- Rotary Rugged Sensor is a transducer to detect the angle / speed of the system which correspondence to the rotary motion of the shaft. - Rotary Rugged Sensor is based on contactless Magnetic technology and hence has a very long life- This Transducer can be customised in several ways to have different Electrical angle, Voltage Output, Current Output,...
The piezometer cable allows multiple piezometers to be installed simply and reliably in a single well. The piezometer string and slurry tubing are placed in the well and cement and bentonite slurry is pumped until the well is filled.
◆ Maximum flexibility in connecting the system◆ 4 dielectrically isolated ground subsystem◆ Straightforward setup, easy to connect via USB cable
HFP01 is the world’s most popular sensor for heat flux measurement in the soil as well as through walls and building envelopes. The total thermal resistance is kept small by using a ceramics-plastic composite body. The sensor is very robust and stable. It is suitable for long term use on one location as well as repeated installation when a measuring...
LI19 is a high accuracy handheld read-out unit / datalogger.It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors.LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery life...
HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger.The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare radiation monitors and flare heat flux sensors.
◆ MQ-610 ePAR meter for scientists and serious growers.◆ The MQ-610 ePAR meter is the first in its class among leading scientists and serious growers for measuring accurately the new extended photosynthetically active radiation (ePAR) from 400 to 750 nm for all types of light sources.◆ It has been designed by the Apogee Instruments engineering team....
The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor dip effect correction factor to meter readings via firmware. The meter provides excellent measurements on all light sources, including LEDs.
The SS-120 measures a wavelength range of 635 to 1100 nm.The spectroradiometer is an easy-to-use, cost-effective, versatile spectral measurement system that can be interfaced to a computer.
The MQ-501 is designed to be an easy-to-use handheld meter for spot-check measurements.The meter includes the AM-001 meter mounting bracket to mount the sensor on a horizontal plane to the meter and approximately 0.17 m of cable to accommodate the bracket length.The full-spectrum sensor incorporates a blue-enhanced silicon photodiode and custom optical...
The MQ-210 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware.The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings.The waterproof sensor...
The new SQ-420 is a stand-alone PAR sensor/datalogger with 10,000 measurement internal data storage that can be uploaded to a computer. If continuously connected, the software graphs real-time PPFD (Photosynthetic Photon Flux Density) 4 YEAR WARRANTY
Buying in quantity or just want some useful advice?Call +34 916292106 or complete our form More info about this product.
AO-YTFC is a flexible current transducer based on Rogowski principle, particularly suitable for measurement incombination with portable devices. AO-YTFC coils are available in different sizes and can be supplied according tocustomer’s design, therefore they can be used in all those applications, in which traditional transducers are not fittingdue to its...
Advantages:• High read accuracy 0.5%• Smart volume for limited space installation• Low power consumption• Lower zero drift down to 5mVRelated Products: AO-YTFC and AO-TFC
Advantages:• High read accuracy 0.5% • Smart volume for limited space installation• Low power consumption• Lower zero drift down to 5mVRelated Products: AO-YTFC and AO-TFC
• High read accuracy 0.5% • Easy to install with DIN-RAIL• High bandwidth for measurement 5 to 20kHz• Lower zero drift down to 2mV