Catalog
Loading...
fuentes RSS
No RSS feed added
Indoor and Outdoor Sensors and Probes for: Temperature, Humidity, Speed and Wind Direction, Solar Radiation, Energy and Consumption, O2, CO, CO2, Pressure, Water and Gas Quality, VOC, etc.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1
- Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar.
These reusable jars are made to easily calibrate relative humidity in the pSense Portable CO2 Meter, the pSense High Accuracy Portable CO2 Meter AZ-0002, and the cSense CO2-Temp-%RH Meter with relay RAD-0201.Or the CM-501 portable CO2 Gas Detector. To use simply unstopper the jar, insert the probe into the jar, and start the calibration mode. It's that...
DURTOX - IP65 plastic box4-20mA detectors by electrochemical technology for the detection of oxygen and the various toxic gases:CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2DURTOX-X - ATEX Explosion Proof Box (LOM 10ATEX2076 Certif.)Models for the following gases: CO, NH3, O2, NO2, H2S, NO, Cl2 and SO2.
- 0…25% vol. optional 0…100% vol.- Modbus- LCD-Display Price shown: FS1309-MBR-A31-X without display or relay.
3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃
The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision
- 0-20 m/s, 0...+50°C, 0-200.000 m³/h - 0-10 V, 4-20 mA - LCD display, relay - 5 scales per device
0-2000/5000/10000 ppm mixed gas VOC temperature, humidity 0-10 V, relay LCD-Display
SDI-12 compatibility allows integration into new and existing SDI-12 systems.The PR2 SDI-12 is a digital alternative to the analogue PR2 Profile Probe. - Multiple PR2 SDI-12s can connect to a compatible data logger via a single cable- Enables the creation of low cost highly flexible sensor networks- Compatible with existing PR2 access tubes and...
The Radius Dendrometer DRW is the ruggedized version of the DR dendrometer.Additionally to the features of the simple DR version, the DRW dendrometer is modified for the use under especially harsh environmental conditions.
Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field.
Monitoring Pen is an extended version of the popular FluorPen, that offers measurement of equal fluorescence parameters and protocols – Ft, QY, OJIP, NPQ and Light Curve. Due to its robust and weatherproof construction the Monitoring Pen is designed for long-term, unattended monitoring of chlorophyll fluorescence parameters in indoor or outdoor...
Illuminance sensor for outdoor use with 5m cable. Select Model by Range:LUX-B-a: 0.02 ÷ 2 klux aLUX-B-b: 0.2 ÷ 20 klux bLUX-B-c: 2 ÷ 200 klux Module MCS-light for RS485 & ModBus output sold separately (choose in Accessories).
Zone Pressure Sensor (ZPS), ±0.25%, 4-20 mA, 0-5" WC Static Pressure Tube Included & LCD Display - Field-selectable ranges and output signals - Five direct and five bidirectional standard ranges - 4-20 mA, 0-5 VDC, or 0-10 VDC output signal - Inches of water or Pascal engineering units - Optional large LCD display - Microprocessor...
Multi-sensor measuring device for CO2, humidity and temperature with traffic light display and tabletop stand. - CO2, Humidity, Temperature- power supply via plug-in power supply- CO2 traffic light- display- piezo buzzer- mute button
- 0...100% mixed gas VOC- 0-10 V, 4-20 mA, changer- automatic re-calibration
The MQ-210X quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware.The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings.The waterproof sensor...
Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls
Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in lengths of 0.3 m (1 ft), 1.8 m (6 ft), 6.1 m, (20 ft) & 15.2 m (50 ft)
1.8m Self Describing Stainless Steel HOBO Temperature Sensor. Self-Describing technology for quick, easy setup Locking jack to ensure sensor is connected and stay connected Food-grade stainless-steel temperature probe Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6...
- Self-Describing technology for quick, easy setup- Locking jack to ensure cable is connected and stays connected- Measurement range: - 0 to 2.5 V (w / SD-VOLT-2.5) - 0 to 5 V (w / SD-VOLT-05) - 0 to 10 V (w / SD-VOLT-10) - 0 to 24 V (w / SD-VOLT-24)- Accuracy: - ± 0.1 mV ± 0.1% of reading (w / SD-VOLT-2.5) - ± 0.2 mV ± 0.3%...
Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure cable is connected and stays connected Measurement range of 0 to 20.1 mA Accuracy of ±0.001 mA ± 0.2.% of absolute current Cable length: 47 cm (18.5 in)
Model FRT-50 - Water Level Indicator With Temperature Sensor and Bottom-Hole Indicator