Catalog
Loading...
fuentes RSS
No RSS feed added
Indoor and Outdoor Sensors and Probes for: Temperature, Humidity, Speed and Wind Direction, Solar Radiation, Energy and Consumption, O2, CO, CO2, Pressure, Water and Gas Quality, VOC, etc.
High Precision Hydrometer Radar and long range: 35 meters - IP68
DIN rail module for signals conversion at high-resolution (18-bit): accepts Pt100, thermopiles, voltages (micro voltage 0÷100mV) and currents or digital signals (frequency or counts) as input, and generates an output signal normalized as: 0÷2Vdc, 0÷20mA, 4÷20mA, RS485, Modbus RS485 serial.Includes a programming interface and a software that allows the...
6310 Long Stem Soil Thermometer - Digital meter, Long-Stem (model 6310)- Extended 8 in (20 cm) stem- Measures from -58° to 302°F (-50°C to 150°C)- Accuracy ± 1.8°C
- Digital meter (model 6300)- Measures from 0° to 160°F (-17° to 71°C)- Accuracy ± 2°C Analog and Digital - Pocket-sized soil thermometers built of tough, corrosive-resistant stainless steel
Thermo hygrometer, instrument measuring range for temperature -200°C...+650°C with probe TP47..., for humidity 0...100%RH.
The LAQUAtwin 4M kit includes: NA11, K11, NO311, CA11, in carrying case (1300077785) with batteries, wash bottle, 2pipettes, manual and calibration solutions
Shielded sensor-Datalogger cable, terminated with end sleeves Datalogger side and 7 pole IP68 connector on sensor side. 5m length.
Base de apoio para pluviômetro Nesa, para fixação do instrumento no chão ou diretamente em superfície plana (h = 10cm).
Shielded sensor-Datalogger cable, terminated with end sleeves Datalogger side and 7 pole IP68 connector on sensor side. 10m length.
Shielded sensor-Datalogger cable, terminated with PS2 connector on Datalogger side, and 7 pole IP68 connector on sensor side. 5m length.
Shielded sensor-Datalogger cable, terminated with PS2 connector on Datalogger side, and 7 pole IP68 connector on sensor side. 10m length.
Heated shielded sensor-Datalogger cable, terminated with end sleeves on Datalogger side and 7 pole IP68 connector on sensor side. 5m lenght.
Sensor-Datalogger cable, terminated with end sleeves on Datalogger side and 7 pole IP68 connector on sensor side. 10m lenght.
Waterproof female 7 pole IP68 connectors for Nesa sensors.
- Highest precision GHI measurements and lowest uncertainty with Class A pyranometer- DNI measurement with <5% uncertainty.- No solar tracker required- MODBUS 485 RTU digital output for DNI, GHI, DHI
Protective, impact resistant case to hold DCM9 camera, SCL9 fisheye lens and SLM9 camera mount.
Combined conductivity and temperature probe with 2 stainless steel AISI316 electrodes, cell constant 0.01.Probe measuring range 0.04...20μS, 0 ... 120°C.
Industrial conductivity probe in glass with 2 platinum electrodes, S7 - PG13.5 connector, cell constant K = 1, temperature working range 0... 100°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C.
- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1.