PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C
PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C
PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C
PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C
PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C
PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C
PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C
PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C

PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C

Referencia: PyroMiniUSB - Fabricante: CALEX ELECTRONICS UK
help_outlineSolicitar Oferta

PyroMiniUSB Sensor Temperatura USB por Infrarrojos -20°C a 1000°C

Acepto la política de privacidad y condiciones  

 

► Características del Sensor

- Sensor de temperatura sin contacto en miniatura con comunicaciones USB
- Mide temperaturas de -20°C a 1000°C
- Cable USB y software incluidos para registro y configuración de datos
- Protocolo Modbus: use su propio software para comunicarse con el sensor


► Características del software: CalexConfig

- Visualización de temperatura, gráfico, configuración y registro de datos
- Conecte varios sensores al mismo software
- Interfaz simple y táctil
- Software incluido con cada sensor

Especificaciones Generales

Temperature Range: -20°C to 1000°C

Interface: RS485 Modbus RTU

Accuracy: ±1% of reading or ±1ºC whichever is greater

Repeatability: ± 0.5% of reading or ± 0.5°C whichever is greater

Emissivity: 0.2 to 1.0

Response Time, t: 90125 ms (90% response)

Spectral Range: 8 to 14 μm

Supply Voltage: 6 to 28 V DC

Supply Current: 50 mA max.

Baud Rate: 9600 baud (other configurations available upon request)

Modbus Data Format: 8 data bits, no parity, 1 stop bit (other configurations available upon request)

Protocol: Modbus over Serial Line

Configuration:
Configuration Method: Via USB using Calex Config or other Modbus software

Configurable Parameters: Emissivity Setting, Averaging, Peak/Valley Hold Processing, Reflected Energy Compensation

Dimensiones (mm)

Air Purge Collar

The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.

► Óptica PMU21 2:1 - para objetivos grandes o de cerca

► Óptica PMU201 20:1 - para objetivos pequeños o distantes

► PMUXCF Óptica de foco cercano (Ø 3,5 mm a 50 mm de distancia)

16 otros productos en la misma categoría:

Producto añadido a Favoritos
Product added to compare.