Scientech2707 Series Inverter

Scientech2707 Series Inverter

Scientech2707 Series Inverter

Scientech2707 Series Inverter

Scientech2707 Series Inverter

Reference: Scientech2707 - Manufacturer: SCIENTECH TECHNOLOGIES

Scientech2707 is a platform which is very useful for Students to understand the low voltage application of the SCR in series inverter.

Scientech2707 is provided with in built power supply, socket for making different interconnections in the circuit and exhaustive learning material.

Built in power supply.
Easy to operate and understand.
On board triggering circuit.
Sockets to make connections.
Gradual variation of frequency.
Test points to observe output at different points.

Study of the operation of series inverter

Category: Platforms

Download (221.82KB)

Viewed products

Nvis 6533 Laboratory for Experimentation with Maxwell's Bridge

Nvis 6533 Laboratory for Experimentation with Maxwell's Bridge 2

TRAINING & EDUCATION SYSTEMS

Nvis 6533 Laboratory for Experimentation with Maxwell's Bridge

NVIS TECHNOLOGIES

Nvis 6533 Laboratory for Experimentation with Maxwell's Bridge is a useful training product for measuring very small values of inductance. It is useful for students to understand the concept and operation of A.C. Bridges.

View

S-BPB-CM50 Barometric Pressure Smart Sensor for HOBO

S-BPB-CM50 Barometric Pressure Smart Sensor for HOBO 2

SENSORS & PROBES

S-BPB-CM50 Barometric Pressure Smart Sensor for HOBO

Onset Data Loggers Onset Computer Corporation

View

16 other products in the same category:

SL-108 PV System Losses

SL-108 PV System Losses 2

TRAINING & EDUCATION SYSTEMS

SL-108 PV System Losses

NVIS TECHNOLOGIES

There are losses occurring in the solar PV system which have to be taken into account while designing the system for a particular load.This setup helps to study the various losses at different stages of the PV system from the panel losses, conduction losses, shading losses, etc.

View

AD-10 AD Series (10 TIE- Points)

AD-10 AD Series (10 TIE- Points) 2

TRAINING & EDUCATION SYSTEMS

AD-10 AD Series (10 TIE- Points)

AD Series include AD-4D, AD-100, AD-101, AD-102, AD-10, AD-01, AD-11, AD-12, AD-13 and AD14.

View

Scientech12E Ultrasonic T-M Mode

Scientech12E Ultrasonic T-M Mode 2

TRAINING & EDUCATION SYSTEMS

Scientech12E Ultrasonic T-M Mode

SCIENTECH TECHNOLOGIES

Using a simple heart model the wall motion is recorded by means of the ultrasonic time-motion method (M - mode). From the M-mode recording the frequency and the heart volume (HZV) are determined.

View

Scientech2515 Laboratory for Mode Characteristics in Fiber Optics

Scientech2515 Laboratory for Mode Characteristics in Fiber Optics 2

TRAINING & EDUCATION SYSTEMS

Scientech2515 Laboratory for Mode Characteristics in Fiber Optics

SCIENTECH TECHNOLOGIES

Scientech2515 Laboratory for Mode Characteristics in Fiber Optics experimental setup has been designed to study the mode characteristics of different fiber optic cables. The two basic types of fiber, Single Mode and Multi Mode can be characterized by measuring Numerical Aperture and the Normalized Frequency (V number) parameter, which guides modes that...

View

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm Cutaway Model

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm Cutaway Model 2

TRAINING & EDUCATION SYSTEMS

AE36084 8 V Cylinders Turbo Diesel Engine for Truck IVECO Turbostar 190-38 cu. cm...

This cutaway model is carefully sectioned for training purposes, professionally painted with different colours to better differentiate the various parts, cross-sections, lubricating circuits, fuel system, cooling system etc.

View

Nvis 7019 Laboratory for Three to Six Phase Conversion Trainer

Nvis 7019 Laboratory for Three to Six Phase Conversion Trainer 2

TRAINING & EDUCATION SYSTEMS

Nvis 7019 Laboratory for Three to Six Phase Conversion Trainer

NVIS TECHNOLOGIES

Nvis 7019 Laboratory for Three to Six Phase Conversion Trainer is a comprehensive training product used to illustrate the core concepts of Electrical Engineering. User can learn of how Three Phase Supply can be converted into Six Phase with proper phase shift by using three Single Phase Transformers. Separate terminals are provided to analyze Six Phase...

View

MVSPLD 1 Automotive Educational Engine Model with the Pump – Line – Nozzle (PLD) Fuel Supply System

MVSPLD 1 Automotive Educational Engine Model with the Pump – Line – Nozzle (PLD) Fuel Supply System 2

TRAINING & EDUCATION SYSTEMS

MVSPLD 1 Automotive Educational Engine model with the Pump – Line – Nozzle (PLD) Fuel...

The truck engine for training is a great tool that allows students to learn the structure of an engine and its components, power supply, cooling system, engine control system. It also allows to study the components and the mode of operation of the engine control system, perform different measurements, evaluations and other types of diagnostics.

View

Tutor for Arduino MTS-101

Tutor for Arduino MTS-101 2

TRAINING & EDUCATION SYSTEMS

Tutor for Arduino MTS-101

Arduino is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing / Wiring language.Besides the easy-to-use hardware and software interface, Arduino is designed to be as flexible as possible to fit your project's needs.

Nvis 7068 Single and Three Phase Inductive Load

Nvis 7068 Single and Three Phase Inductive Load 2

TRAINING & EDUCATION SYSTEMS

Nvis 7068 Single and Three Phase Inductive Load

NVIS TECHNOLOGIES

Nvis 7068 Single and Three Phase Inductive Load is suitable for loading Single Phase and Three Phase supplies and generators. It consists of robust enclosure that contains three banks of switchable inductive loads. Two terminals for each phase are given which are externally accessible through an inbuilt star delta switch.

View

GFC-3100 PEM Fuel Cell Hybrid Training System

GFC-3100 PEM Fuel Cell Hybrid Training System 2

TRAINING & EDUCATION SYSTEMS

GFC-3100 PEM Fuel Cell Hybrid Training System

PEM Fuel Cell Hybrid Training System.The PEM Fuel Cell Hybrid Training System (GFC-3100) provides a modularized teaching platform with a safe and secure experiment.It allows to form a system for green energy generation when integrating with the Solar and Wind Hybrid System GES-500 (optional).

View

W-4 Industrial Robot Disassembly Training Workstation

W-4 Industrial Robot Disassembly Training Workstation 2

TRAINING & EDUCATION SYSTEMS

W-4 Industrial Robot Disassembly Training Workstation

Yalong Intelligent

◆ The W-4 industrial robot disassembly training workstation consists of a Hengrui H3 transparent six-axis industrial robot assembly, a drawer-type aluminum alloy table, an industrial robot training module, and a 22-inch touch LCD screen.

View

Nvis 7007N DC Shunt Motor Compound Generator Lab

Nvis 7007N DC Shunt Motor Compound Generator Lab 2

TRAINING & EDUCATION SYSTEMS

Nvis 7007N DC Shunt Motor Compound Generator Lab

NVIS TECHNOLOGIES

Nvis 7007N DC Shunt Motor Compound Generator Lab is a definitive system for the Electrical Machines Laboratories that provides comprehensive learning of a DC Compound Generator under different loading conditions. The DC Compound Machine is a combination of a Series and Shunt Wound Machine and hence allows the same to have the torque characteristics...

View

Scientech2665 TechBook for Experimenting with Digital TV and DTH

Scientech2665 TechBook for Experimenting with Digital TV and DTH 2

TRAINING & EDUCATION SYSTEMS

Scientech2665 TechBook for Experimenting with Digital TV and DTH

SCIENTECH TECHNOLOGIES

Scientech TechBooks are compact and easy-to-use learning platforms to provide a modern, portable, complete and practical way to learn Technology. Each TechBook is provided with detailed multimedia learning material that covers the basic theory, the step-by-step procedure for conducting the experiment and other useful information.

View

Scientech2702 SCR Triggering Circuits

Scientech2702 SCR Triggering Circuits 2

TRAINING & EDUCATION SYSTEMS

Scientech2702 SCR Triggering Circuits

SCIENTECH TECHNOLOGIES

Scientech 2702 is a platform which is very useful for Students to understand various thyristor firing methods like R, RC half wave, RC full wave.

View

MSVAZ 1 Wheel Alignment Training Stand

MSVAZ 1 Wheel Alignment Training Stand 2

TRAINING & EDUCATION SYSTEMS

MSVAZ1 Wheel Alignment Training Stand

Using this training stand it is very easy to teach several students at the same time, because all suspension components are visible from all sides. Suspension geometry adjustments are performed like in a real automobile – using screws and tools.

View

Scientech2423B Traffic Light Control By PLC

Scientech2423B Traffic Light Control By PLC 2

TRAINING & EDUCATION SYSTEMS

Scientech2423B Traffic Light Control By PLC

SCIENTECH TECHNOLOGIES

Traffic Light Control enables Students and practicing Engineers to gain invaluable practical experience of the principles and application of Programmable Logic Controllers.

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow