RED-Wave-NIRX-SR Spectrometer

The InGaAs detector is a Sensors Unlimited linear photo diode array with 512 pixels (1024 optional) 25μm by 250μm tall to provide best signal performance. The detector has an integrated two-stage thermo electric cooler (TEC) maintained at –20 °C, stabilized within +/-0.1°C. The RED-Wave-NIRX-SR-InGaAs spectrometers use single strand SMA 905 fiber optic input.

Ruggedized: The detachable spectrograph assembly and control electronics are protected inside a rugged metal enclosure, suitable for portable, process, lab, and field applications.

Onboard Memory: with pre-set calibrations, spectrometer settings, and snap shot memory to provide an instantaneous spectral image from the InGaAs array.

High Speed Electronic Interface: can be attached directly to a computers USB port for high speed data transfer.  Options for Wifi/ethernet communication available as well as other interfaces.

NIR Applications include chemical absorption, moisture analysis, transmission of filter and optical components, and high power radiometric measurements such as laser characterization.

• Extended Range NIR Spectrometer

- Measurements from 900-2300nm (0.90-2.30 um)
- For NIR measurements and applications requiring wide spectral range
- 512 or 1024 pixel extended range InGaAs Photo Diode Array
- Integrated 2-stage thermo electric cooler set to operate at -30 deg C
- Increased air flow and specialized heat sink for added stability
- Applications include absorption, transmission, and laser measurement.