Shopping Cart
S-UCC-M006 120 Hz Pulse Sensor
Pulse Sensor
The Electronic Switch Pulse Input Adapter connects sensors with pulse outputs to loggers with smart-sensor inputs. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second).
Features:
- Plug-n-play adapter for pulse output sensors
- Automatically recognized by the H21-USB HOBO Energy Logger
- 6m cable length (extension cables available)
Maximum Input Frequency: 120 Hz (120 pulses per second)
Measurement Range: 0 – 65,533 pulses per logging interval
Resolution: 1 pulse
Lockout time: 45 µs ± 10%
Recommended Input Type: Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)
Preferred Switch State: Active low input Normally open
Edge Detection: Falling edge, Schmitt Trigger buffer (logic levels: low ≤ 0.6 V, high ≥ 2.7 V)
Minimum Pulse Width: 1 ms
Input/Output Impedance: 100 KΩ
Open Circuit Input Voltage: 3.3 V
Maximum Input Voltage: 3.6 V
User Connection: 24 AWG wires, 2 leads: white(+), black(-)
Operating Temperature Range: -40° to 75°C (-40° to 167°F)
Overall Cable Length: 6.5 m (21 ft.)
Housing: Weatherproof PVC housing protects input adapter electronics
Housing Dimensions: 14 x 0.95 cm (5.5 x 0.375 in.)
Weight: 310 g (11 oz.)
Bits per Sample 16
Number of Data Channels: 1
- The Sensor measures:
- Pulses 120 Hz
- Output Signal:
- HOBO Smart Sensor
- Cable Length:
- 1.8 m
- Sensor for use in:
- Outdoor
You might also like
16 other products in the same category:
- New
WATER (TEMP, LEVEL & QUALITY)
LeveLine-Mini Water Level and Temperature
Tap to zoom
