CDLSHTC2 Duct CO2 Sensor from Veris

CDL carbon dioxide sensors maximize energy savings, while ensuring optimal ventilation. The sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CDL Series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy and ensuring tenant comfort.

APPLICATIONS

• Controlling ventilation in response to occupancy
• Facilitating compliance with ASHRAE 62.1 standard for air quality
• Office buildings, conference rooms, schools, retail stores, etc.

SERIES SPECIFICATIONS

• Input Power 20 to 30VDC/24VAC; 100mA max.
• Analog Output 4-20mA, (clipped & capped)/0-5VDC/0-10VDC (selectable)
• Operating Temperature Range 0° to 50°C (32° to 122°F)
• Housing Material High impact ABS plastic

CO2 Transmitter:

• Sensor Type Non-dispersive infrared (NDIR), diffusion sampling
• Measurement Range 0-2000/5000 ppm (programmable)
• Accuracy ±30 ppm ±2% of measured value*
• Repeatability ±20 ppm ±1% of measured value
• Response Time <60 seconds for 90% step change

RH Transmitter:

• HS Sensor Fully replaceable, digitally profiled thin-film capacitive (32-bit mathematics) U.S. Patent 5,844,138
• Accuracy ±2% from 10 to 80% RH; NIST traceable multi-point calibration
• Stability ±1% @ 20°C (68°F) annually, for two years
• Operating Humidity Range 0 to 100% RH
• Operating Temperature Range 10° to 35°C (50° to 95°F)
• Temperature Coefficient ±0.1% RH/°C above or below 25°C (typical)

Temperature Transmitter:

• Sensor Type Solid-state, integrated circuit
• Accuracy ±0.5°C (±1°F) typical
• Resolution 0.1°C (0.2°F)
• Range 10° to 35°C (50° to 95°F)

Relay Contacts:

• 1 Form C (SPDT) (on models without setpoint slider option) 1A@30VDC, resistive; 30W max.