Force Balance Accelerometer AFB (DC-200 Hz - 160 dB)
Force Balance Accelerometer AFB (DC-200 Hz - 160 dB)

Force Balance Accelerometer AFB (DC-200 Hz - 160 dB)

Reference: Force - Manufacturer: SolGeo
  • AFB Force Balance Accelerometers are high- sensitivity, low noise sensors designed for use in seismic and low level, low frequency motion studies.
  • The accelerometers are self-contained and provide a high level, low impedance output.
  • No signal conditioning is required in most applications.
  • These sensors utilize low noise electronics in conjunction with the force balance principle to make possible measurements in the low frequency micro-G range.
help_outlineAsk for Quote

Force Balance Accelerometer AFB (DC-200 Hz - 160 dB)

I accept privacy policy rules  

 

The AFB Force Balance Accelerometers are high sensitivity low noise sensors available in ranges of +-0.25G to +-4G for seismic and low level- low frequency motion studies. 

As mentioned above the AFB accelerometers utilise low noise electronics for low frequency micro G range.



Aside from tradition DC couples zero output,the AFB-3C & 2C & 1C & also provide AC coupled zero output which eliminates tilt induced or offset errors facilitating high amplification of the basic output. 

The AFB accelerometers are desirable ideal for seismic applications such as earthquake monitoring & dynamic vibration monitoring in buildings & structures such as hydroelectric power plants/dams historical buildings,large buildong structures such as stadium etc.

ELECTRONIC FEATURES 1, 2 or 3 axis
Ranges Available ±0.25 G, ±0.5 G, ±1 G, ±2 G, ±4 G
Output Voltage  ±10 Volts differential
Bandwidth  Standard 0-200 Hz
Input test  1/8 FS
Nominal Sensitivity  2.5 V/g
Orthogonality error  < 0.01%
Dynamic range  >165dB (from 0.1Hz to 20Hz with +/-1g setup)
Offset drift  0.000001 g/°C
Damping  0.707
Cross Axis Sensitivity  <0.3%
Non-Linearity  <0.1% F.R.
Supply voltage  10-15V DC (80mA for 3 axis unit)
ENVIROMENTAL
Temperature, Operating  -20 To +55 Deg C
Temperature, Storage  -40 To +90 Deg C
Humidity  100% R.H.
PHYSICAL
Weight 3 kg
Size  14cm L x 15.5cm W x 8.5cm H (without connectors)
Case Material  Aluminium
Protection  IP66 (IP67, IP68 optinonally)
Connector MIL-C-10

16 other products in the same category:

KX612EM48 Electrode kit for V.H.R. electrical tomography and V.E.S.
Geotechnics /Seismology

KX612EM48 Electrode kit for V.H.R. Electrical Tomography and V.E.S. (48 Channels)

MAE srl
KX612EM48
€24,900.00
The kit includes everything necessary to perform very high resolution (24-bit resolution) geoelectric surveys through the multi-electrode method in multichannel mode, which drastically reduces the recording time in 3D studies. The instrument can manage 48 electrodes without using expansion boxes. The kit includes everything necessary for V.E.S. Surveys...
Product added to wishlist
Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow