PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C
PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C
PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C
PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C
PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C
PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C
PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C
PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C

PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C

Reference: PyroMiniUSB - Manufacturer: CALEX ELECTRONICS UK
help_outlineAsk for Quote

PyroMiniUSB USB Infrared Temperature Sensor -20°C to 1000°C

I accept privacy policy rules  

 

Sensor Features

- Miniature non-contact temperature sensor with USB communications
- Measures temperatures from -20°C to 1000°C
- USB cable and software included for data logging and configuration
- Modbus protocol - use your own software to communicate with the sensor


Software Features: CalexConfig

- Temperature display, graph, configuration and data logging
- Connect multiple sensors to the same software
- Simple, touch-friendly interface
- Software included with every sensor

General Specifications

Temperature Range: -20°C to 1000°C

Interface: RS485 Modbus RTU

Accuracy: ±1% of reading or ±1ºC whichever is greater

Repeatability: ± 0.5% of reading or ± 0.5°C whichever is greater

Emissivity: 0.2 to 1.0

Response Time, t: 90125 ms (90% response)

Spectral Range: 8 to 14 μm

Supply Voltage: 6 to 28 V DC

Supply Current: 50 mA max.

Baud Rate: 9600 baud (other configurations available upon request)

Modbus Data Format: 8 data bits, no parity, 1 stop bit (other configurations available upon request)

Protocol: Modbus over Serial Line

Configuration:
Configuration Method: Via USB using Calex Config or other Modbus software

Configurable Parameters: Emissivity Setting, Averaging, Peak/Valley Hold Processing, Reflected Energy Compensation

Dimensions (mm)

Air Purge Collar

The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.

PMU21 2:1 optics - for large or close-up targets

PMU201 20:1 optics - for small or distant targets

PMUXCF Close-focus optics (Ø 3.5 mm at 50 mm distance)

Viewed products

16 other products in the same category:

Product added to wishlist
Product added to compare.