9520-10D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 7541 and Temperature Sensor

Horiba

9520-10D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 7541 and Temperature Sensor

Horiba

9520-10D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 7541 and Temperature Sensor

Reference: 9520-10D (3014046711) - Manufacturer: HORIBA

DO Electrodes (with 1m cable unless otherwise stated, BNC and phono jack - not applicable for replacement tips)

- For laboratory use, 1m cable
- Operates with replaceable DO tip 7541 and built-in temperature sensor
- Waterproof
- Use magnetic stir plate during measurement

Dissolved Oxygen Range	0 to 19.99 mg/L
Temperature Range	0 to 45 °C
Response Time	20 seconds (90% response time at constant temperature)
Connectors	BNC, phono jack
Cable Length	1m
Overall Length	184mm
Diameter	15mm
Replacement DO Tip	7541

The Sensor measures:: DO/Temperature

English Brochure

Download (3.07MB)

3014046711 Manual

Download (619.33KB)

3014074145 7541 DO Electrode Tip

3014074145 7541 DO Electrode Tip 2

SENSORS & PROBES

3014074145 7541 DO Electrode Tip

View

You might also like

3014074145 7541 DO Electrode Tip

3014074145 7541 DO Electrode Tip 2

SENSORS & PROBES

3014074145 7541 DO Electrode Tip

View

16 other products in the same category:

3200611627 Combined pH Electrode Micro ToupH Glass Body 9418-10C (for Low Volume Samples) LAQUA

3200611627 Combined pH Electrode Micro ToupH Glass Body 9418-10C (for Low Volume Samples) LAQUA 2

Electrodes

9418-10C LAQUA Combined pH Electrode Micro ToupH with Glass Body (for Low Volume Samples)

9418-10C (3200611627)

This glass-body, refillable pH electrode can measure samples as low as 50µL.- Compatible with extremely small sample containers (e.g., microtubes)- Temperature sensor is placed beside the bulb for quick response- Waterproof

View

9300-10D LAQUA ORP Electrode

9300-10D LAQUA ORP Electrode 2

Electrodes

9300-10D LAQUA ORP Electrode

9300-10D (3014046710)

- The flat platinum sensor at the tip allows measurement of low-volume samples- Waterproof- Combination electrode

View

2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode)

2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode) 2

Electrodes

2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode)

2060A-10T (3014080434)

Suitable for a wide range of pH measurements since the resistance of the liquid junciton is small

View

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S) 2

Electrodes

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C (3200697407)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell)

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell) 2

Electrodes

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell)

1066A-10C (3014080432)

Very durable minimum alkali errors. Most widely used for general pH measurements.

View

9630-10D 3-in-1 pH Electrode Plastic Body (for Low Conductivity Samples) for LAQUA

9630-10D 3-in-1 pH Electrode Plastic Body (for Low Conductivity Samples) for LAQUA 2

Electrodes

9630-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Low Conductivity Samples)

9630-10D (3200528726)

This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for pH measurement of samples that have low conductivity or buffering capacity. Suitable for tap water and quality control check in water purification plant. Recommended to use with cleaning solution 230.

View

3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use) Conductivity Cell

3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use) Conductivity Cell 2

Electrodes

3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use)...

3562-10D (3014082513)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

Standard Graphite Counter Electrode Kit, AFCTR3B

SENSORS & PROBES

Standard Graphite Counter Electrode Kit AFCTR3B

It includes a 150 mm long isolation tube and adapter to fit 14/20 port 6.4 mm OD graphite rod, 184.2 mm long.

View

PFL Plate Electrode

Accessories (Cells, Electrodes, Kits, etc.)

PFL Plate Electrode

WonATech-ZIVE LAB

View

AFCTR4 Platinum Wire Counter Electrode

AFCTR4 Platinum Wire Counter Electrode 2

Electrodes & Accessories from Pine Research

AFCTR4 Platinum Wire Counter Electrode

View

9625-10D LAQUA pH 3 in 1 Electrode with Plastic Body (For General Use)

9625-10D LAQUA pH 3 in 1 Electrode with Plastic Body (For General Use) 2

Electrodes

9625-10D LAQUA pH 3 in 1 Electrode with Plastic Body (For General Use)

9625-10D (3200360505)

This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for general-purpose use. Cable: 1m, Impermeable. Modelo anterior: 9621-10D

View

514-20 Conditioning Solution (For Conductivity & Salt Sensors) LAQUA Twin

514-20 Conditioning Solution (For Conductivity & Salt Sensors) LAQUA Twin 2

SENSORS & PROBES

514-20 Conditioning Solution (For Conductivity & Salt Sensors) LAQUA Twin (6X14ml)

514-20 (3999960114)

Conductivity/Salinity conditioning solution 6 x 14 ml

6069-10C pH Electrode Combined Refillable Micro Tube with Glass Body (for Very Slender Test Tubes) for LAQUA

6069-10C pH Electrode Combined Refillable Micro Tube with Glass Body (for Very Slender Test Tubes) for LAQUA 2

Electrodes

6069-10C LAQUA pH Electrode Combined Rechargeable Tube Glass Body (Very Thin Test Tubes)

6069-10C (3014081107)

This refillable pH electrode can measure samples in very slender test tubes (e.g., NMR test tubes) due to its long, thin, glass-body. - Electrode: 291mm length, 3mm diameter- Waterproof

View

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell 2

Electrodes

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) /...

3574-10C (3014082592)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

7661S LAQUA Ion Fluoride Electrode Tip

7661S LAQUA Ion Fluoride Electrode Tip 2

Electrodes

7661S LAQUA Ion Fluoride Electrode Tip

7661S (3200693606)

View

9480-10C LAQUA Combined pH Electrode Long ToupH Glass Body (Large Containers and Long Test Tubes)

9480-10C LAQUA Combined pH Electrode Long ToupH Glass Body (Large Containers and Long Test Tubes) 2

Electrodes

9480-10C LAQUA Combined pH Electrode Long ToupH Glass Body (Large Containers and Long...

9480-10C (3200611628)

This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.- Electrode: 283mm length, 8mm diameter- Constructed with responsive glass that is 10x stronger than JIS standards- Waterproof, Pb-free glass

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow