9680S-10D LAQUA pH Electrode 3-1 Long ToupH Glass Body (Large Containers and Long Tubes)

Horiba

9680S-10D LAQUA pH Electrode 3-1 Long ToupH Glass Body (Large Containers and Long Tubes)

Horiba

9680S-10D LAQUA pH Electrode 3-1 Long ToupH Glass Body (Large Containers and Long Tubes)

Reference: 9680S-10D (3200585455) - Manufacturer: HORIBA

This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.
- Electrode: 283mm length, 8mm diameter
- Constructed with responsive glass that is 10x stronger than JIS standards
- Waterproof, Pb-free glass

pH Range	0 to 14
Temperature Range	0 to 100°C
Liquid Junction	Ceramic
Temperature Sensor	Integrated
Cable	1m
Connectors	BNC, phono jack
Overall Length	283mm
Diameter	8mm
Filling Solution	525-3 or 300 (3.33M KCl)

The Sensor measures:: pH

English Brochure

Download (3.07MB)

Download (285.36KB)

Viewed products

Nvis 7033 Slip Ring Induction Motor Lab

Nvis 7033 Slip Ring Induction Motor Lab 2

TRAINING & EDUCATION SYSTEMS

Nvis 7033 Slip Ring Induction Motor Lab

NVIS TECHNOLOGIES

The product helps to understand the basic concepts and functioning of a Slip Ring Induction Motor. This system gives practical knowledge about the running and reversing of Induction Motor, study of no load test, block rotor test and load test etc.

View

AO-K-600-O3 Ozone O3 Gas Detector

AO-K-600-O3 Ozone O3 Gas Detector 2

GAS ANALYZERS

AO-K-600-O3 Single Gas Detector (0 - 20ppm)

- Electrochemical Sensor.- O3 alarm: 5 and 10 ppm* Built-in 32-bit MCU, high reliability and self-adaptive capacity. Other Gases Detected (See Specifications and Consult Prices):Combustible gas (CH4, C3H8, H2) and toxic gas, oxygen, other rare toxic gases such as ammonia, NO, PH3, NH3, NO2, HCN, SO2, etc. also available, can be specified by the customer...

View

AO-BF1/E Bayonet temperature probe with 120° measuring tip (-30 +350°C)

SENSORS & PROBES

AO-BF1/E Bayonet temperature probe with 120° measuring tip (-30 +350°C)

5 m glass fibre/stainless steel netting (2x0,22 mm²) -30...+350°C Pt100, Pt500, Pt1000

16 other products in the same category:

9651-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Field Testing)

9651-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Field Testing) 2

Electrodes

9651-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Field Testing)

9651-10D (3200642020)

This plastic-body, gel-filled pH electrode with integrated temperature sensor is ideal for field testing. The body is durable and no need to refill the electrode.

View

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples)

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples) 2

Electrodes

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and...

9481-10C (3200611631)

This glass-body, refillable pH electrode gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints). Previous model: 9681-10D, 9677-10D.- The liquid junction is designed with a movable sleeve that prevents clogging. - Easy to clean and provides quick stable readings- Waterproof, Pb-free glass

View

9630-10D 3-in-1 pH Electrode Plastic Body (for Low Conductivity Samples) for LAQUA

9630-10D 3-in-1 pH Electrode Plastic Body (for Low Conductivity Samples) for LAQUA 2

Electrodes

9630-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Low Conductivity Samples)

9630-10D (3200528726)

This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for pH measurement of samples that have low conductivity or buffering capacity. Suitable for tap water and quality control check in water purification plant. Recommended to use with cleaning solution 230.

View

9382-10D LAQUA Electrode Conductivity (Submersible) Conductivity Cell with Temperature Sensor

9382-10D LAQUA Electrode Conductivity (Submersible) Conductivity Cell with Temperature Sensor 2

Electrodes

9382-10D LAQUA Electrode Conductivity (Submersible) Conductivity Cell with Temperature...

9382-10D (3014046709)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

6069-10C pH Electrode Combined Refillable Micro Tube with Glass Body (for Very Slender Test Tubes) for LAQUA

6069-10C pH Electrode Combined Refillable Micro Tube with Glass Body (for Very Slender Test Tubes) for LAQUA 2

Electrodes

6069-10C LAQUA pH Electrode Combined Rechargeable Tube Glass Body (Very Thin Test Tubes)

6069-10C (3014081107)

This refillable pH electrode can measure samples in very slender test tubes (e.g., NMR test tubes) due to its long, thin, glass-body. - Electrode: 291mm length, 3mm diameter- Waterproof

View

7660S LAQUA Ion Chloride Electrode Tip

7660S LAQUA Ion Chloride Electrode Tip 2

Electrodes

7660S LAQUA Ion Chloride Electrode Tip

7660S (3200697411)

View

7683S Calcium Ion Electrode Tip for LAQUA

7683S Calcium Ion Electrode Tip for LAQUA 2

Electrodes

7683S LAQUA Calcium Ion Electrode Tip

7683S (3200697414)

View

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell 2

Electrodes

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) /...

3574-10C (3014082592)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

7661S LAQUA Ion Fluoride Electrode Tip

7661S LAQUA Ion Fluoride Electrode Tip 2

Electrodes

7661S LAQUA Ion Fluoride Electrode Tip

7661S (3200693606)

View

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S) 2

Electrodes

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C (3200697407)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

9625-10D LAQUA pH 3 in 1 Electrode with Plastic Body (For General Use)

9625-10D LAQUA pH 3 in 1 Electrode with Plastic Body (For General Use) 2

Electrodes

9625-10D LAQUA pH 3 in 1 Electrode with Plastic Body (For General Use)

9625-10D (3200360505)

This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for general-purpose use. Cable: 1m, Impermeable. Modelo anterior: 9621-10D

View

0040-10D LAQUA pH Electrode ISFET

0040-10D LAQUA pH Electrode ISFET 2

Electrodes

0040-10D LAQUA pH Electrode tip ISFET

0040-10D (3200367926)

DISCONTINUED ISFET Replacement Tip for 0040-10D ISFET pH electrode

View

Standard Graphite Counter Electrode Kit, AFCTR3B

SENSORS & PROBES

Standard Graphite Counter Electrode Kit AFCTR3B

It includes a 150 mm long isolation tube and adapter to fit 14/20 port 6.4 mm OD graphite rod, 184.2 mm long.

View

2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double Stack Cell)

2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double Stack Cell) 2

Electrodes

2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double...

2565A-10T (3014080436)

Suitable for measurements of liquid other than normal aqueous solutions, such as suspensions, emulsions, paste, and non-aqueous solutions. When the potassium chloride solution of the internal solution reacts with the sample, measurements can be stably carried out by filling the sample or any other chloride solution in the external jacket. The replacement...

View

6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and Non-Aqueous Solvents)

6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and Non-Aqueous Solvents) 2

Electrodes

6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and...

6377-10D (3014093085)

The glass membrane of this glass-body, refillable pH electrode with integrated temperature sensor, is highly sensitive to low-conductivity samples and non-aqueous solvents.

View

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S)

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S) 2

Electrodes

6582S-10C LAQUA Potassium Electrode (K +) ISE with 2 Electrode Tips (7682S)

6582S-10C (3200697409)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow