Catalog
Loading...
fuentes RSS
No RSS feed added
TRAINING AND EDUCATIONAL SYSTEMS, SIMULATORS
FOR ELECTRICITY/ELECTRONICS, INDUSTRY AND ENERGY,
AUTOMOTIVE, ROBOTICS, ETC.
We have a wide range of educational training systems for institutes, automotive technical schools, vocational schools, technical universities, academies, agricultural schools, private technical training organizations, diagnosti...
TRAINING AND EDUCATIONAL SYSTEMS, SIMULATORS
FOR ELECTRICITY/ELECTRONICS, INDUSTRY AND ENERGY,
AUTOMOTIVE, ROBOTICS, ETC.
We have a wide range of educational training systems for institutes, automotive technical schools, vocational schools, technical universities, academies, agricultural schools, private technical training organizations, diagnostic equipment and workshop equipment manufacturers, etc.
Brands: KandH, NVIS TECHNOLOGIES, Pine Research, SCIENTECH TECHNOLOGIES, AutoEDU, Omega, TandD, Work Benches...
NFC (Near Field Communication) is a type of short-range wireless technologies, with typical distance of 10 cm or less. NFC is compatible with existing passive RFID (13.56 MHz ISO/IEC 18000-3) infrastructures.
The KL-500 Industrial Electronic Trainer is a self-contained training equipment allowing students to learn more than 70 experiments through a power supply unit and 16 replaceable modules.
The KL-600 Advanced Sensor Training System is a comprehensive sensor / transducer control training system that incorporates industrial-grade components with various control circuits and load units. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications.
The KL-620 Basic Sensor Experimental Lab is a comprehensive sensor / transducer control training system. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications.
MEMS (Micro-electromechanical Systems) based sensors such as accelerometer, gyroscope and magnetometer, are crucial components used in smart portable devices, such as smart phone and tablet PC. The demand of MEMS sensors has been increased dramatically and identified as one of the most promising technologies nowadays.
ACS-1000, covered with many technical disciplines, explicates the central significance of Analog Control System. This applies particularly in mechanical and electrical engineering, and as well in production and process technology. It is indispensable to plant and system technology.
Explosive growth in network device diversity and mobile communications, along with global adoption of networking technologies, have overwhelmed IPv4 and have driven the development of a next-generation Internet Protocol (IPv6).
MTS-Z80A helps students to understand the architecture and programming of Z-80 computer. The system contains five main parts: (1) a Z-80 CPU (2) system and user memory (3) world standard chip sets (4) input and output devices, and (5) external interface.
MTS-86C helps students to understand the architecture and programming of 8086 computer. The system contains five main parts : (1) an 8086 CPU (2) system and user memory (3) world standard chip sets (4) input and output devices, and (5) external interface.
MTS-33T allows students to carry out 3 types of micromouse experiments on a lab table individually including wall maze solver, line maze solver, and line follower. With provided maze wall, post, and line track pad, students can setup corresponding experiment environments efficiently and flexibly.
8051 is the original chip of MTS-51 family devices which is originated from Intel. This chip is a stand-alone, powerful 8-bit single-chip microcomputer and is commonly used for real-time control applications. MTS-51 microcomputer trainer is designed for learning 8051 core architecture and instructions.
MSP430 training lab is a training platform designed for learning MSP430 microcontroller from Texas Instruments (TI). The microcontroller used is MSP430F5438A, which is featured with ultralow-power and consists of several peripheral modules targeted for various analog and digital applications.
MTS-887. PIC16F Training Lab which uses Microchip's PIC16F887 is a 8-bit microcontroller to implement various I/O control experiments. This controller contains most of the powerful functions in modern MCUs nowadays.
LV-200 LabVIEW I /O Interface Lab is a platform of hardware / software development. It offers a variety of I /O and peripheral devices used in real life and adopts National Instruments LabVIEW (G programming language) as development software.
An interface is a hardware and software data transmission regulator that controls data exchange between the PC and other peripheral devices, including RS-232C, AT-BUS, IDE, SCSI, ISA, PCI, AGP, IrDA, GPIB, USB, IEEE-1394, Wireless etc...
CIC-310 CPLD/FPGA Development System is self-contained system, which contains stabilized DC power supplies, Development Board , and Experiment Board. CIC-310 also provides digital system designers for hardware verification which enables students to learn digital system design efficiently.
CIC-560 training system is designed based on the latest digital technology in conjunction with EDA experimental teaching material. This training system consists of FPGA chip with higher logic elements and large number of pins. Therefore, students are able to develop, implement and verify design of basic or advanced digital circuit, digital signal...
CIC-500 is a DSP development system designed for learning DSP hardware implementations. The system combines both DSP chip for signal processing and FPGA chip for I/O control.
Simple, Easy, Fast, and Fun PSoC (Programmable System on a Chip) is one of the most innovative technologies nowadays. Instead of adopting a traditional MCU with fixed peripherals, or designing a circuit with discrete analog and digital components, the designer can select a single off-the-shelf PSoC on a complete project for mixed-signal...
The KL-300 Digital Logic Lab is a comprehensive and self-contained system suitable for anyone engaged in digital logic experiments.
The KL-310 Advanced Digital Logic Lab is designed for students and engineers interested in developing and testing prototype circuits. The lab includes combinational logic, sequential logic, memory, ADC/DAC. experiment circuits and offers several application circuits (PWM, timer, motor control..etc.).
- The ETS-8000A is a basic digital logic circuit training system with CE Certificate.- It includes combinational logic and sequential logic experiment circuits.- The course content of experiment has hardware emulation and software simulation.- Customers need to have their own PC/laptop and Digital Storage Oscilloscope. ► CE Mark