Catalog
Loading...
fuentes RSS
No RSS feed added
► High acccuracy of measurements► Excellent characteristics► Waterproof enclosure made of anodized aluminium with IP67► Output signal 0-5V or digital SDI-12 and Low power consumption MODEL SSR1D DISCONTINUED
- Ready to deploy, with pre-attached sensors- Easy config. & data offload with free HOBOconnect app- Durable TEROS-10 soil moisture sensor (>10 years)- For use in both mineral soils and soilless media- Sturdy, sharp stainless-steel spikes for easy installation- Option to view data in Percent of Field Capacity In what environment does this data...
- Easy operation with two buttons- Battery life for 10,000 accuracy readings- High quality SM150 Soil Moisture Sensor- Compatible with a variety of growing media
- NEW lower cost soil sensor kit for portable use- Instant measurements of moisture, EC, and temperature- Comes complete with readout meter and case
AO-200-02 Quantum PAR Sensor , Photosynthetic Active Radiation SensorCertification: CE-EMC, CE-LVD, RoHS, ISO9001 7 RS485 Units in stock for immediate delivery!
► Scattering Radiometer► Spectral range: 280-3000nm► Power Supply: 12-24VDC► Range: 0-2000W/m2► Output: 0-5V,4-20mA,RS485► Sensitivity: 7-14μV*W-1*m2► Latitude scale range: 0~50°N or S► Red latitude: ±25°► Ring diameter: Φ400mm► Accuracy: <±2%
Certification: CE-EMC, CE-LVD, RoHS, ISO9001
Temperature Transducer.: PT 1000 class "A" The PT1000CNT is a temperature transducer to acquire surface temperatures.The class “A” PT1000 sensible element is made by a brass block, meanwhile the cable insulation is realized in poly-propylene for the conductor an in thermoplastic rubber (TPE) for the secondary insulation.
3 channels Wireless Smart Datalogger- Interface module provided with 3 inputs for wind speed, direction and solar radiation- Type "C" lithium internal battery for a battery life up to 5 years with samples every 10 minutes- IP 65 sealing (to be used with AN6410 and ANS-RSG-B transducers).
Certification: CE-EMC, CE-LVD, RoHS, ISO9001 AO-600-07 Data Logger includes Data Acquisition, storage, transmission and management, and many other functions.
This bracket is required for mounting HOBO MX2301 and MX2305 loggers in either an RS1 or M-RSA solar radiation shield.
This clamp allows the U23-001 or U23-004 to be mounted in the M-RSA radiation shields.It is NOT required for use with other HOBO Pro v2 models.
AO-WDS2DVSE Ultrasonic Anemometer for Davis VP 2 CE Approved
Two wires class "A" PT1000 for cryogenic use► Stainless steel finger Ø 6x50 mm► Complete with 2 meters teflon shielded cable► Operating temperature -200÷150°C.
Turn any analog sensor into an SDI-12 compliant sensor using the SDI-12 Sensor Translator.This small but powerful device will sample any analog, or one wire sensor and interface it to the SDI-12 bus.It handles all of the complex SDI-12 protocols, it is simple to use, and is inexpensive to implement in production units.
Replace your expensive data logger, and turn your PC into an affordable SDI data logger with the SDI-12 to USB Protocol Translator board.Plug in the board into a USB port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.
Replace your expensive data logger, and turn your PC, modem or wireless interface into an affordable SDI data logger with the SDI-12 to RS232 Protocol Translator board. Merely plug in the board to a RS232 port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.
Anemometer-Thermometer Data Logger for air speed measurement which use hot-wire or vane probes, for temperature Pt100 sensor with SICRAM module.
AST.1 telescopic shaft or AP471S1.23.6 / AP471S1.23.7 fixed extension shafts available on request.2 m cable.Probe complete with SICRAM module.
Atmospheric pressure transmitter. Outdoor, indoor use. Barometric pressure transmitter for outdoor and indoor use.Display reading and pressure output is user selectable in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2.