Catalog
Loading...
fuentes RSS
No RSS feed added
Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.
3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃
The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision
- 0-20 m/s, 0...+50°C, 0-200.000 m³/h - 0-10 V, 4-20 mA - LCD display, relay - 5 scales per device
0-2000/5000/10000 ppm mixed gas VOC temperature, humidity 0-10 V, relay LCD-Display
0 μg/m³ ... 1000 μg/m³ Modbus LCD-Display
Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field.2 Models to select in attributes:AO-ST15 (15 meter band)AO-ST20 (20 meter band)
Illuminance sensor for outdoor use with 5m cable. Select Model by Range:LUX-B-a: 0.02 ÷ 2 klux aLUX-B-b: 0.2 ÷ 20 klux bLUX-B-c: 2 ÷ 200 klux Module MCS-light for RS485 & ModBus output sold separately (choose in Accessories).
AO-WDS6E is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor and precipitation sensor, its specification refer to AO-WDS9E.
FluorPen FP 110 is a portable, battery-powered PAM fluorometer that enables quick and precise measurement of chlorophyll fluorescence parameters in the laboratory, greenhouse, or in the field. It can be effectively used for studying photosynthetic activity, stress detection, herbicide testing, or mutant screening. Affordable price and straight-forward...
- 0...100% mixed gas VOC- 0-10 V, 4-20 mA, changer- automatic re-calibration
The suspension cuvette includes a 400 μL stainless steel sample compartment with a PVC exterior.
The MQ-210 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware.The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings.The waterproof sensor...
Self-Describing technology for a quick & easy set up. A Locking jack ensures sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in 1.8 m (6 ft) Faster response time Suitable for use on tubes, pipes and floors or walls
Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in lengths of 0.3 m (1 ft), 1.8 m (6 ft), 6.1 m, (20 ft) & 15.2 m (50 ft)
Model FRT-50 - Water Level Indicator With Temperature Sensor and Bottom-Hole Indicator
10m foldable Aluminum Mast for Weather Stations.
Pneumatic Telescopic Mast for Weather Stations
Metodology: Ground thermal conductivityTCR24 is designed to measure soil heat transmission (soil tendency to transmit heat).This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. 2 years warranty.Measurement can be done on site...
The AO-HT-401 CO2 Carbon Dioxide meter is widely used in factories, workshops, greenhouses, clean rooms, industry and agriculture, bars and restaurants, hotels, hospitals, shops, airports, train stations, offices, entertainment rooms and conference rooms. cinema, etc.
The AO-HT-501 CO2 Carbon Dioxide meter is widely used in factories, workshops, greenhouses, clean rooms, industry and agriculture, bars and restaurants, hotels, hospitals, shops, airports, train stations, entertainment rooms and conference rooms. cinema, etc.
The AO-HT-2000 carbon dioxide meter is widely used in factories, workshops, greenhouses, clean rooms, industry and agriculture, bars and restaurants, hotels, hospitals, markets and shops, airports, train and bus stations, halls of entertainment, theaters and cinemas, etc.
Wall monitor with CO2 sensor, Temperature and relative humidity meter for applications in Industry, hospitality, hospitals, greenhouses, warehouses, etc.