Catalog
Loading...
fuentes RSS
No RSS feed added
Analyses Hemispherical Images Calculates canopy structure parameters and solar radiation indices Predicts radiation levels beneath canopy The HemiView canopy image analysis system provides the hardware and software needed to acquire and analyse hemispherical images of forest canopies and woodland canopies.
Suitable for SLM10 Camera Mount and DCM10 cameras
Protective, impact resistant case to hold DCM9 camera, SCL9 fisheye lens and SLM9 camera mount.
Combined conductivity and temperature probe with 2 stainless steel AISI316 electrodes, cell constant 0.01.Probe measuring range 0.04...20μS, 0 ... 120°C.
Industrial conductivity probe in glass with 2 platinum electrodes, S7 - PG13.5 connector, cell constant K = 1, temperature working range 0... 100°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C.
- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C.
CM 1000 Software required for to activate the data logger
Reflectance of red light (660 nm) and NIR (850 nm) to measure the turf canopy and the Normalized Difference Vegetation Index (NDVI). Ref.: 2975NDVI
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 1.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1
- Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar.
These reusable jars are made to easily calibrate relative humidity in the pSense Portable CO2 Meter, the pSense High Accuracy Portable CO2 Meter AZ-0002, and the cSense CO2-Temp-%RH Meter with relay RAD-0201.Or the CM-501 portable CO2 Gas Detector. To use simply unstopper the jar, insert the probe into the jar, and start the calibration mode. It's that...
The CM-501 is a Carbon Dioxide (CO2) handheld gas detector designed to measure carbon dioxide gas concentrations in the many applications and industries. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings.
Transport case provides safe storage of the device, the power adapter and measuring probes during transport. Accessories are protected by a closable partition.External case dimensions: 357x305x95mm.
Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.
3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃
The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision