Catalog
Loading...
fuentes RSS
No RSS feed added
Agricultural Investigation and Environmental Research.
Sensor readings on your SmartPhone ZSC Bluetooth SIS - Sensor Interface - stereo
Included in delivery: U0141 Instruction manual Traceable calibration certificate 1 x 3.6 V lithium battery Free analytical software COMET Vision EXTERNAL PROBES ARE NOT INCLUDED IN DELIVERYUSB COMMUNICATION CABLE NOT INCLUDED IN DELIVERY. See Accessories tab.
CE Compliant
The PolyPen RP 410 is a sophisticated handheld instrument that incorporates an internal Xenon incandescent lamp and measures spectral reflectance of leaves. The PolyPen RP 410 firmware calculates formulas of commonly used reflectance indexes (e.g. NDVI, NDGI, PRI etc.) and displays these on its touch screen instantaneously as graphs or data sheets.All...
► High acccuracy of measurements► Excellent characteristics► Waterproof enclosure made of anodized aluminium with IP67► Output signal 0-5V or digital SDI-12 and Low power consumption MODEL SSR1D DISCONTINUED
- Ready to deploy, with pre-attached sensors- Easy config. & data offload with free HOBOconnect app- Durable TEROS-10 soil moisture sensor (>10 years)- For use in both mineral soils and soilless media- Sturdy, sharp stainless-steel spikes for easy installation- Option to view data in Percent of Field Capacity In what environment does this data...
- Easy operation with two buttons- Battery life for 10,000 accuracy readings- High quality SM150 Soil Moisture Sensor- Compatible with a variety of growing media
- NEW lower cost soil sensor kit for portable use- Instant measurements of moisture, EC, and temperature- Comes complete with readout meter and case
AO-200-02 Quantum PAR Sensor , Photosynthetic Active Radiation SensorCertification: CE-EMC, CE-LVD, RoHS, ISO9001 7 RS485 Units in stock for immediate delivery!
► FMT 150 photobioreactors feature a combination tabletop cultivator and computer controlled monitoring device.► The product line comprises three instruments that differ in the capacity of the culture vessel: 400 ml, 1 and 3 l.► All photobioreactor models can be supplied with a number of useful accessories that facilitate the fulfillment of a wide range...
CTS120 is a probe to measure in soils, length: 120 cm, which allows to carry out practical and quick measurements of thermal conductivity (or thermal resistivity) in the medium in which it is inserted at a precise level.
Certification: CE-EMC, CE-LVD, RoHS, ISO9001
3 channels Wireless Smart Datalogger- Interface module provided with 3 inputs for wind speed, direction and solar radiation- Type "C" lithium internal battery for a battery life up to 5 years with samples every 10 minutes- IP 65 sealing (to be used with AN6410 and ANS-RSG-B transducers).
Precision Electronic Tensiometer for precise water potential measurements in the laboratory.The only Precision Electronic Tensiometer for use in the laboratory and with scientific quality.Easy to install, the TEROS 31 Electronic Tensiometer has an accuracy of ±0.5 kPa, offering accurate and representative water potential measurements.Responds to changes...
Certification: CE-EMC, CE-LVD, RoHS, ISO9001 AO-600-07 Data Logger includes Data Acquisition, storage, transmission and management, and many other functions.
This bracket is required for mounting HOBO MX2301 and MX2305 loggers in either an RS1 or M-RSA solar radiation shield.
This clamp allows the U23-001 or U23-004 to be mounted in the M-RSA radiation shields.It is NOT required for use with other HOBO Pro v2 models.
Includes:► NIR-CS-3000BT Whole Grain Analyser► Test/Hectoliter Weight Module Built-in► Concave Holographic Grating, Wavelength range: 720 - 1100nm
AO-WDS2DVSE Ultrasonic Anemometer for Davis VP 2 CE Approved
Two wires class "A" PT1000 for cryogenic use► Stainless steel finger Ø 6x50 mm► Complete with 2 meters teflon shielded cable► Operating temperature -200÷150°C.
Turn any analog sensor into an SDI-12 compliant sensor using the SDI-12 Sensor Translator.This small but powerful device will sample any analog, or one wire sensor and interface it to the SDI-12 bus.It handles all of the complex SDI-12 protocols, it is simple to use, and is inexpensive to implement in production units.
Replace your expensive data logger, and turn your PC into an affordable SDI data logger with the SDI-12 to USB Protocol Translator board.Plug in the board into a USB port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.