Catalog
Loading...
fuentes RSS
No RSS feed added
Agricultural Investigation and Environmental Research.
Measures incident and transmitted PAR in canopies Direct display of Leaf Area Index (LAI) Usable in cloudy and clear conditions Proven, research-grade canopy analyser Ideal for phenotyping applications
Combined conductivity and temperature probe with 2 stainless steel AISI316 electrodes, cell constant 0.01.Probe measuring range 0.04...20μS, 0 ... 120°C.
Industrial conductivity probe in glass with 2 platinum electrodes, S7 - PG13.5 connector, cell constant K = 1, temperature working range 0... 100°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C.
- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes.3/4" BSP connector, 5m cable, cell constant K = 1, 2-wire Pt100, temperature working range 0... 80°C.
CM 1000 Software required for to activate the data logger
- Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar.
These reusable jars are made to easily calibrate relative humidity in the pSense Portable CO2 Meter, the pSense High Accuracy Portable CO2 Meter AZ-0002, and the cSense CO2-Temp-%RH Meter with relay RAD-0201.Or the CM-501 portable CO2 Gas Detector. To use simply unstopper the jar, insert the probe into the jar, and start the calibration mode. It's that...
Transport case provides safe storage of the device, the power adapter and measuring probes during transport. Accessories are protected by a closable partition.External case dimensions: 357x305x95mm.
Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.
3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃
The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision
SDI-12 compatibility allows integration into new and existing SDI-12 systems.The PR2 SDI-12 is a digital alternative to the analogue PR2 Profile Probe. - Multiple PR2 SDI-12s can connect to a compatible data logger via a single cable- Enables the creation of low cost highly flexible sensor networks- Compatible with existing PR2 access tubes and...
Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field.
Available with heater for cold climatic condition (mod. PL400R) and with MCS module for signal normalization (0÷2Vdc, 4÷ 20mA, RS485/Modbus)
Illuminance sensor for outdoor use with 5m cable. Select Model by Range:LUX-B-a: 0.02 ÷ 2 klux aLUX-B-b: 0.2 ÷ 20 klux bLUX-B-c: 2 ÷ 200 klux Module MCS-light for RS485 & ModBus output sold separately (choose in Accessories).
AO-WDS6E is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor and precipitation sensor, its specification refer to AO-WDS9E.
The "flow through head" is designed for laboratory applications where an oxygen sensor is used. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes.
FluorPen FP 110 is a portable, battery-powered PAM fluorometer that enables quick and precise measurement of chlorophyll fluorescence parameters in the laboratory, greenhouse, or in the field. It can be effectively used for studying photosynthetic activity, stress detection, herbicide testing, or mutant screening. Affordable price and straight-forward...
Multi-sensor measuring device for CO2, humidity and temperature with traffic light display and tabletop stand. - CO2, Humidity, Temperature- power supply via plug-in power supply- CO2 traffic light- display- piezo buzzer- mute button
The suspension cuvette includes a 400 μL stainless steel sample compartment with a PVC exterior.