Catalog
Loading...
fuentes RSS
No RSS feed added
The AO-HT-86 Temperature and Humidity Meter provides fast and accurate measurements for analysis of critical environmental conditions, with dew point temperature and bulb temperature from the web.The temperature and humidity meter is used to measure the temperature and humidity of the environment so that we can know the storage conditions.
- 4-in-1 Gas Measurement Tool- Detects the concentration of toxic and harmful gases
Quarta-Rad RD1008 - The first handheld radiation detector that detects and displays radiation results for Beta- and Gamma- as two separate values.It was designed for detecting ionizing radiation and estimating the ambient dose-equivalent values, as well as the ambient equivalent dose-rate of photon (gamma- and roentgen-) ionizing radiation and the...
Temperature and Humidity Data Logger made for the Cloud. Recorded data can automatically be uploaded via wireless or wired LAN to our free cloud service "T&D WebStorage Service" where it can be accessed from anywhere you have a connection.
HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger.The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare radiation monitors and flare heat flux sensors.
HOBO MX2304 weatherproof data logger with 1 external Temperature probe and data transfer via Bluetooth via a mobile device (smartphone or tablet).
Portable gas detector with large LCD. It can monitor CO, H2S,O2 or combustible gas. The instrument features two instant alarms with audio/visual and vibratory indicators, rechargeable battery and simple use.
* The AO-K400M portable multi-gas detector can measure 4 gases: CO, EX, H2S and O2 in its Standard configuration.* It can also be configured from the factory to detect: a combustible gas, O2 and two other types of toxic gases continuously and simultaneously. Consult prices for these other gas combinations.* K-400M is widely used in areas where...
Gas detector with built-in pump. Detects a single gas to choose from list.... (request Quote)
4-20mA detectors for the detection of explosive gases using catalytic technology -pellistor- compatible with any system with standard 4-20mA inputs and with the DURGAS, EUROSONDELCO and SIEMENS CC62P power units via Interface.
4-20mA detectors for the detection of explosive gases using catalytic technology -pellistor- compatible with any system with standard 4-20mA inputs and with the DURGAS, EUROSONDELCO and SIEMENS CC62P power units via Interface.
4-20mA detectors for the detection of explosive gases using catalytic technology -pellistor- compatible with any system with standard 4-20mA inputs and with the DURGAS, EUROSONDELCO and SIEMENS CC62P power units via Interface.
AO-60 fixed gas detector adopts advanced catalytic gas sensor or electrochemical sensor, which can translate the gas concentration in the air to the digital signal output.
AO-4AS portable multiple gas detector could detect combustible gas O2 and other two types toxic gases continuously and simultaneously.
AO-80 gas detector with a fast response, good stability, high sensitivity, small size, light weight, easy to carry
At AlphaOmega-Electronics you will find the best range of Data Loggers and at the most competitive prices.
Datalogger is designed to record temperature, humidity and CO2. In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.
Green LED glows: CO2 concentration 0 to 1000 ppmYellow LED glows: CO2 concentration from 1001 to 1200 ppmRed LED glows - CO2 concentration 1201 ppm and more
The HOBO MX1102 CO2 logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments.MX1102 measures CO2 from 0 to 5,000 ppm – and the free HOBOconnect app allows you to access your data from your mobile phone or tablet within a 30 meter range of the logger.MX1102 also features a USB port so it may be...
Ultrasonic 2D Anemometer is designed to simultaneously measure the 2-dimensional horizontal components of the wind speed and direction based on principle of TOF (time of flight) of ultrasonic sound wave.Low power chip make its power consumption low to 0.2W. Using ABS shell, Weight is lighter and Structure is more stable
Precision, Range and Affordable, for hte scientist inside you. RADEX model RD1706 had been developed on the base of the RD1503 model, but it is more precise due to use of TWO Geiger-Muller tubes.It can be used by professionals and non-professionals for quick and reliable measurements of radiation background in environmental, soil and non-consumable products.