Catalog
Loading...
fuentes RSS
No RSS feed added
The Thermograph is designed for recording temperature. The values are stored in a non-volatile electronic memory. The transfer of data to the personal computer for further analysis is done through USB, RS232, GSM or Ethernet through a suitable adapter.
The Thermograph is designed for recording temperature. The values are stored in a non-volatile electronic memory. The transfer of data to the personal computer for further analysis is done through USB, RS232, GSM or Ethernet through a suitable adapter.
The Thermograph is designed for recording temperature. The values are stored in a non-volatile electronic memory. The transfer of data to the personal computer for further analysis is done through USB, RS232, GSM or Ethernet through a suitable adapter.
Thermometer Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter. Thermometer is designed for record of temperature.
Single channel thermometer Ni1000/Pt1000(-200 to +500°C) Thermometer is designed for direct measurement and datalogging of temperature into the internal non-volatile memory. Free PC program enables to transfer recorded data via RS232 serial link to the personal computer for consequent evaluation. Instrument is connected to the PC through included...
High accuracy thermometer for Ni1000 RTD sensor (-50 to +250°C). Audio and optical alarm of measured temperature. Minimum/maximum memory. memory of minimum and maximum temperature included traceable calibration certificate.
High accuracy thermometer for Ni1000 RTD sensor (-50 to +250°C). Audio and optical alarm of measured temperature. Minimum/maximum memory. memory of minimum and maximum temperature included traceable calibration certificate.
Temperature Transmitter and Regulator with RS485 Output. Outdoor, indoor use.(-30 to +80°C) Temperature transmitter is equipped with three two-state inputs for detection of two-state signals - e.g. power presence, water, smoke, airflow, glass break detection, door contact.
Sensor H0530 is designed for online monitoring of temperature. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.
Centesimal thermometer in the range ±199.99 °C, decimal outside this range, one input for Pt100 probes with SICRAM module measuring range -200°C to +650°C.
Data Logger centesimal thermometer in the range ±199.99°C; decimal in the range -200…+650°C.One input for Pt100 probes with SICRAM module
Thermometer with two inputs, the first for Pt100 probes equipped with SICRAM module, the second input for thermocouple type K, J, T, E, N
Thermometer with two inputs, the first for Pt100 sensor for input of probes equipped with SICRAM module, and the second input for thermocouple type K, J, T, E, N
HD2328.0 At AlphaOmega-Electronics you will find the best range ofTemperaturesensor and at the most competitive prices. "
-200ºC to + 650ºC depends on probe used Temperature wireless data logger. Optional graphic LCD display (option G). M12 connector for Pt100/Pt1000 temperature probes.Instrument operating temperature / humidity: -20…+70 °C / 0…85 %RH.Supplied with 3.6V non-rechargeable Li-SOCl2 battery and HD35.03 wall mount support.The temperature probes (TP35.1…) have to...
Temp. Range -200ºC to +650ºC depending on the sensor used
-200ºC ÷ + 650ºC Depends on Probe Used
Kit Magnelab, Three Phase Transducers Rogowski Coils - RopeCT® with .333 mV AC output.
Kit for measuring current in 3 phases.
APPLICATIONS Energy audit. Monitoring system and energy control. Individual machine load monitoring. Power peak control. Switchboards, gensets, motor control centers, etc. Remote metering and cost allocation.