Catalog
Loading...
fuentes RSS
No RSS feed added
This grid-connected system allows users to power their home or businesses with renewable energy.Any excess electricity produced is fed back into the grid.
LI19 is a high accuracy handheld read-out unit / datalogger.It is used to make mobile measurements, for short term datalogging (as a static logger), and as an accurate millivolt amplifier directly connected to a PC. LI19 can be used with a variety of sensors.LI19’s most common application is with heat flux- and solar radiation sensors. LI19 battery life...
HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger.The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare radiation monitors and flare heat flux sensors.
New, completely revamped version Very thin coil diameter: down to 7 mm New connector design Accessory to secure the coil to the busbar Possibility to seal the locking of the coil
- Four selectable scales- Equalization and 90° shifting of the Rogowski coil signal- 1 A RMS full scale output for instantaneous value- Compact DIN rail enclosure- 85 ... 265 VAC power supply
HOBO MX2304 weatherproof data logger with 1 external Temperature probe and data transfer via Bluetooth via a mobile device (smartphone or tablet).
AO-DA01 is a DIN-RAIL 1A Output Rogowski coil integrator installation in distribution box,in a plastic 1 module DIN-RAIL enclosure, powered directly from the mains.
Portable multi-function power analyzer with 5 rated current ranges: 100A, 600A, 1kA, 3kA, 6kA for use with Rogowski coils.
- Rated input: 100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)- Rated output: 5A rms- Accuracy: ±0.5% (from 1% to 100% of rated )- Bandwidth: 30Hz to 5KHz- Power supply: 24VDC- Maximum Burden: 0.8Ω- Maximum power: 15W- Requires Rogowski Coils (not included)
The Rogowski coils must be connected to an electronic integrator for 90° phase shift compensation and frequency equalization: AO-S1 AO-D1 AO-S9
Temperature sensor. Subject to availability in stock.
Temperature and Humidity Data Logger made for the Cloud. Recorded data can automatically be uploaded via wireless or wired LAN to our free cloud service "T&D WebStorage Service" where it can be accessed from anywhere you have a connection.
Portable Multifunction Power Analyzer for Rogowski CoilsThree Phase handhel data logger 0.5 class accuracy with 3 nominal current ranges: 600A, 3kA, 6kA.-Voltage, Current, Harmonic, Demand, Power factor, Frequency, Max/Min values, active & reactive & apparent power and energy, Unbalance, Angle.
The HOBO UX100-023 Temperature/Relative Humidity data logger with external sensors records temperature and relative humidity in an indoor environment. It is ideal for monitoring occupant comfort in office buildings, logging temperature trends in server rooms, tracking food storage conditions in warehouses, and measuring humidity levels in museums.
Economic Data Loggers HOBO from Onset Computer for Temperatures & Relative Humidity.Data Logger for Energy/HVAC & Air Quality Applications.
Thermo-hygrometer Data Logger Energy/HVAC Indoor Applications for Air Quality.
- Measures Temperature from -40 °C to +200 °C.
P117 Portable Ultrasonic Flowmeter enables the user to do flow measurement checks at many points in a flow processwithout the need for a permanent installation.
HY-DISPLAY is a powerful console with Embedded real-time operating system taht can work reliably and continuously, without garbage and redundancy. No worries about "system crash".This console is mainly for HongYuv sensors (for free), but it can also becustomized to fit your own 3rd party sensors (with an extra cost).