Catalog
Loading...
fuentes RSS
No RSS feed added
The glass membrane of this glass-body, refillable pH electrode with integrated temperature sensor, is highly sensitive to low-conductivity samples and non-aqueous solvents.
Uses a glass membrane highly sensitive to lowconductivity water and nonaqueous solvents. Can also be used for ordinary pH measurement.
EC‐33, EC/TDS/temp, 0‐199.9mS/cm; 0.0‐9990ppm, 3‐point Cal
Replacement Conductivity / TDS sensor for B‐771, EC11, EC22 and EC33
Conductivity Standard 1413 uS/cm, 6 x 14 ml
Conductivity Standard 12.9 mS/cm, 6 x 14 ml
Conductivity/Salinity conditioning solution 6 x 14 ml
CTS120 is a probe to measure in soils, length: 120 cm, which allows to carry out practical and quick measurements of thermal conductivity (or thermal resistivity) in the medium in which it is inserted at a precise level.
Wet Sensor WET-2 for soil humidity - (Water content, EC and Temperature). Includes 1m cable fitted with 25-way D socket, suitable for connection to HH2.
- Measures Water content, EC and Temperature- Complete kit with readout unit & case Sensors are normally ordered as a complete kit that includes a WET Sensor, an HH2 Moisture Meter and a handy carry case. There are three types of Kit – each with a different set of substrate calibrations, including coir, peat and mineral wool. Please see below for...
Sensor of the soil temperature, soil moisture, the electrical conductivity of the soil, the complex dielectric permittivity of the soil and the electrical conductivity of the "water pores" contained in the soil hole.Both the conductivity of the soil and the water of the pores are automatically compensated by the temperature. Includes standard 5 meter cable
Combined conductivity and temperature probe with 2 stainless steel AISI316 electrodes, cell constant 0.01.Probe measuring range 0.04...20μS, 0 ... 120°C.
Industrial conductivity probe in glass with 2 platinum electrodes, S7 - PG13.5 connector, cell constant K = 1, temperature working range 0... 100°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 0.1, 4-wire Pt100, temperature working range 0... 80°C.
Combined industrial conductivity and temperature probe in Rytron with 2 platinum electrodes. 3/4" BSP connector, 5m cable, cell constant K = 10, 4-wire Pt100, temperature working range 0... 80°C.
- 4-electrode combined conductivity and temperature probe with Pt100 sensor.- Cell constant K= 0.7- 1.5 m cable- Temperature working range 0…90°C.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 10.
Conductivity and temperature combined probe, glass body, 2 platinum wire electrodes, cell constant 0.1
- Conductivity and temperature combined probe.- Cell constant 0.7.- Probe measuring range 5 μS ... 100 mS, 0 .. 90 ° C- Max pressure 5 bar.
Metodology: Ground thermal conductivityTCR24 is designed to measure soil heat transmission (soil tendency to transmit heat).This type of survey is usually carried out prior to install underground pipes, or prior to build geo-thermic wells to detect heat from the soil, for buildings heating or conditioning. 2 years warranty.Measurement can be done on site...
AO-520-02 is an integrated soil moisture, temperature & electrical conductivity (EC) sensor. Optional model available for pH Range: 3-9 pH (consult)
IP68 conductivity analyzer (including temperrature compensation) (0~500ms/cm), POM housing, RS485 communication(3m cable)+Built-in temperaturesensor (Pt 100)(0~85℃)