Catalog
Loading...
fuentes RSS
No RSS feed added
* Type: Class II * Standards IEC61252, ANSI S1.25 for noise dose and sound exposure meters, IEC 61672 Class 2 / ANSI S1.4 Type S for sound level
The instrument is used to determine the flash point of petroleum products.
The instrument is designed to determine the “closed cup flash point” of petroleum products, which is expressed as the lowest temperature when a sample is heated in a “closed cup” under the stipulated condition until the mixture of its vapor and air contacts flame and appears flash.
- Rotary speed (Rpm): 10 ~ 180- Evaporating speed (ml/min): 20- Achievable vacuum (Pa): 399.9 (below 3mmHg)- Temperature range (OC): Room temp ~ 100- Temperature display: Keypad input, Digital display- Speed-setting: Knob setting, Digital display
- Rotary Bottle: 5L - Diameter of flange opening: Ф50mm- Collecting bottle: 3- Rotary speed of main Machine: 10-140rpm- Temperature control: Digital display, temperature control 0~99°C- Evaporating capability Water: ≥2L/h- Alcohol: ≥4L/h- Elevating stroke: 0~150mm
The Portable Thermocouple calibrator is a high stability heat source designed forthe calibration of thermocouples up to 7.5mm, with a maximum operating temperature of 1200°C. Thermocouples.
The function of the milk analyzer is to make quick analyzes of milk in fat (fat), non-fat solids (SNF), proteins, lactose and water content percentages, temperature, freezing point, salts, total solids, as well as density of the same sample directly after milking, in collection and during the process. Ultrasonic Milk Analyser based on MS Windows and...
CALI-1200HN is a type of semi-portable, multi-hole block and dry blocktemperature gauge used to calibrate temperature sensors asThermocouples of different sizes at the same time at high temperature. This calibrator is suitable for steel, glass, metallurgical processes, cement plants, refineries / Fertilizers, Thermal Power Plants, etc.
The instrument is designed to determine the “closed cup flash point” of petroleum products, which is expressed as the lowest temperature when a sample is heated in a “closed cup” under the stipulated condition until the mixture of its vapor and air contacts flame and appears flash.
Is used to batch analyses the particle size and distribution of the soft, medium-hard, hard and brittle sample within a short time. The result is accurate and repeatable.Most parameters can be digital preset to perform dry sieving and wet sieving for samples.
Produces accurate, consistent results and features constant-controlled amplitude, precise controls, quick-release hold-downs.Maintenance-free, quiet operation; it can be used directly on a laboratory countertop.Belt closing system provides more secure method for placing and removing test sieve stacks in the unit.This belt closing system also enables...
Produces accurate, consistent results and features constant-controlled amplitude, precise controls, quick-release hold-downs.Maintenance-free, quiet operation; it can be used directly on a laboratory countertop.Belt closing system provides more secure method for placing and removing test sieve stacks in the unit.This belt closing system also enables...
VortexIn fluid dynamics, a vortex is a region within a fluid where the flow is mostly a spinning motion about an imaginary axis, straight or curved. That motion pattern is called a vortical flow.A vortex mixer is a simple device used commonly in laboratories to mix small vials of liquid. It consists of an electric motor with the drive shaft oriented...