Converters

4-20CONV 4-20mA Converter

Converters

4-20CONV 4-20mA Converter

4-20mA Converter

0-10V Converter

Converters

0-10V Converter

0-10V Converter

0-5V Converter

Converters

0-5V Converter

0-5V Converter

Volts to 4-20mA Sensor Converter

Volts to 4-20mA Sensor Converter 2

Converters

Volts to 4-20mA Sensor Converter

Volts to 4-20mA Sensor Converter

SDI-12-TRANS-RS232 Converter from sensors to SDI-12 bus

SDI-12-TRANS-RS232 Converter from sensors to SDI-12 bus 2

Converters

SDI-TRANS-RS232 Sensor Translator board (SDI-12 to RS232 Translator)

SDI-TRANS-RS232

Replace your expensive data logger, and turn your PC, modem or wireless interface into an affordable SDI data logger with the SDI-12 to RS232 Protocol Translator board. Merely plug in the board to a RS232 port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.

SSE Anticipator Supply for External Sensors

Converters

SSE Anticipator Supply for External Sensors

With its independent battery or input for external battery, it feeds other sensors that have a high power consumption or that need to be fed several seconds to stabilize the measurement before the measurement of the Data Logger.

MCS Signal Conditioning Module

MCS Signal Conditioning Module 2

SENSORS FOR WEATHER STATIONS

MCS Signal Conditioning Module for Nesa sensors

DIN rail module for signals conversion at high-resolution (18-bit): accepts Pt100, thermopiles, voltages (micro voltage 0÷100mV) and currents or digital signals (frequency or counts) as input, and generates an output signal normalized as: 0÷2Vdc, 0÷20mA, 4÷20mA, RS485, Modbus RS485 serial.Includes a programming interface and a software that allows the...

MCS Signal Conditioning Module

MCS Signal Conditioning Module 2

Energy

MCS-LIGHT Signal Conditioning Module for Nesa sensors

The MCS module, designed with the latest electronic technology, can transform electrical digital or analog signals into other "standardized signals". DIN rail module, pre-programmed for conversion of:Input signals: Pt100, thermopile, voltages (micro voltages 0÷100mV) and currents or digital signals (frequency or count).Output signals: 0÷2Vdc, 0÷20mA ,...

H721 VERIS AC TRANSDUCER (4-20mA output)

H721 VERIS AC TRANSDUCER (4-20mA output) 2

TRANSDUCERS

Hawkeye H721 AC Current Transducer (4-20mA output)

Solid core transducer. (does not open to insert the cable).Selectable amperage range:H721LC: 0 - 10/20 / 40AH721HC: 0 - 50/100 / 200AAnalog output: 4-20 mA, powered by external @ 12-30VDC Minimum Order: 2 Units

View

SC-XX (V) Signal Conditioner (Voltage Output)

SC-XX (V) Signal Conditioner (Voltage Output) 2

Pot-Tech Electronics

SC-XX (V) Signal Conditioner (Voltage Output)

Pot-Tech Electronics PVT LTD

View

VW0420: Vibrating Wire Isolated Analog Interface

VW0420: Vibrating Wire Isolated Analog Interface 2

RST Instruments

VW0420 Isolated Analog Interface for Vibrating Wire Sensor (4-20mA output)

RST Instruments

◆ Maximum flexibility in connecting the system◆ 4 dielectrically isolated ground subsystem◆ Straightforward setup, easy to connect via USB cable

View

AO-DA05-5

AO-DA05-5 2

SENSORS & PROBES

Rogowski coil integrator AO-DA05-1

- Rated input: 100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)- Rated output: 5A rms- Accuracy: ±0.5% (from 1% to 100% of rated )- Bandwidth: 30Hz to 5KHz- Power supply: 24VDC- Maximum Burden: 0.8Ω- Maximum power: 15W- Requires Rogowski Coils (not included)

Showing 1-12 of 12 item(s)

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow