Catalog
Loading...
fuentes RSS
No RSS feed added
Indoor and Outdoor Sensors and Probes for: Temperature, Humidity, Speed and Wind Direction, Solar Radiation, Energy and Consumption, O2, CO, CO2, Pressure, Water and Gas Quality, VOC, etc.
Handheld Meter only (includes electrode attachment, manual & 2 x AAA batteries)
Handheld Water Quality Meters Kit (PD110K) (PD110 pH/ORP/EC/TDS/RES/SAL) in carrying case, 9651-10D pH electrode plastic-body gel-filled; 9551-20D Galvanic DO probe, 2m cable; pH
This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for general-purpose use. Cable: 1m, Impermeable. Modelo anterior: 9621-10D
This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for pH measurement of samples that have low conductivity or buffering capacity. Suitable for tap water and quality control check in water purification plant. Recommended to use with cleaning solution 230.
This plastic-body, refillable pH electrode with integrated temperature sensor can measure 1% hydrofluoric acid solution (at 25°C, immersed for 1min) for about 1000X. Suitable for drain water measurement after etching process.
This plastic-body, refillable pH electrode with integrated temperature sensor has higher resistance and longer stability than conventional electrodes. The alkali-resistant glass membrane is suitable for strong alkali samples such as plating solutions.
This plastic-body, gel-filled pH electrode with integrated temperature sensor is ideal for field testing. The body is durable and no need to refill the electrode.
This glass-body, refillable pH electrode with integrated temperature sensor is recommended for a wide range of applications, including pH buffers and aqueous test solutions.Previous model: 9625-10D, 9611-10D- Offers quick stability and drift reduction- Constructed with responsive glass that is 10x stronger than JIS standards- The dome-shaped tip provides...
This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.- Electrode: 283mm length, 8mm diameter- Constructed with responsive glass that is 10x stronger than JIS standards- Waterproof, Pb-free glass
Adjustable wall support for Ø 30 mm photometric and radiometric probes.
Radiometric probe for measuring the irradiance in the UVA spectral range (315-400 nm, with peak at 360 nm), diffuser for cosine correction. Measuring range: 1⋅10-3 ... 10 W / m2. Cable length 5 m M12 connector.
Radiometric probe for measuring the irradiance in the UVB spectral range (280-315nm, with peak at 305nm), diffuser for cosine correction. Measuring range: 1⋅10-3 ... 100 W / m2. Cable length 5 m M12 connector.
Radiometric probe for measuring the irradiance in the UVC spectral range (220-280nm, with peak at 260nm), diffuser for cosine correction. Measuring range: 1⋅10-3 ... 100 W / m2. Cable length 5 m M12 connector.
This glass-body, refillable pH electrode with integrated temperature sensor gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints).- The liquid junction is designed with a movable sleeve that prevents clogging. - Easy to clean and provides quick stable readings- Waterproof, Pb-free glass
Radiometric probe for measuring PHOTONS FLOW (light flow in the field of photosynthesis of chlorophyll). Cosine correction. Measuring range 0 ... 5000 μmol m-2s-1. Cable length 5 m M12 connector.
Combined probe for measuring the illuminance (lux), with standard photopic spectral response, and for measuring the irradiance (W / m2) in the UVA spectral range (315-400 nm, with peak at 360 nm). Both sensors are equipped with diffuser for the correction according to the law.Illuminance measuring range: 0.3 ... 20⋅103 lux. Irradiance measuring range:...
This glass-body, refillable pH electrode 6367-10D with temperature sensor has a sleeve junction for improved stability and repeatability. Ideal for highly accurate pH measurement
Radiometric probe for measuring PHOTONS FLOW (light flow in the field of photosynthesis of chlorophyll). Cosine correction. Measuring range 0 ... 5000 μmol m-2s-1. Cable L = 5 m. Supplied with base with levelling device.
The glass membrane of this glass-body, refillable pH electrode with integrated temperature sensor, is highly sensitive to low-conductivity samples and non-aqueous solvents.
Photometric probe for measuring illuminance, CIE photopic filter, spectral response according to the standard photopic curve, diffuser for cosine correction, dome in K5. Measuring range: 0.1 ... 200,000 lux. Supplied with base with levelling device. The cable (CPM12 AA5 ... D) has to be ordered separately.
First Class pyranometer according to ISO 9060. Output in μV / (Wm-2). Supplied with: shade disk, cartridge with silica-gel crystals, 2 spare sachets, leveling device, connector and calibration report. On request 5 or 10 m cables with 4-pole M12 connectors.
The needle tip of this glass-body, refillable pH electrode with temperature sensor allows measurement of food samples and aqueous solutions.
This plastic-body, refillable pH electrode is recommended for general-purpose use. Previous model: 9621-10D
This glass-body, refillable pH electrode is recommended for a wide range of applications, including pH buffers and aqueous test solutions.- Offers quick stability and drift reduction- Constructed with responsive glass that is 10x stronger than JIS standards- The dome-shaped tip provides strength in all directions, reducing damage concerns- Waterproof,...