Catalog
Loading...
fuentes RSS
No RSS feed added
Save Time, Save Money! A concept that is unique and dramatically reduces the wiring/installation times of multifunction power meters and current transformers.
Single and 3 phase 4 wire network , balanced or unbalanced load operation Double CT Connection 4 module DIN rail mounting Built in Dual Energy pulse output , configured to either kwh per load or kwh and kVArh (reative) per load and RS485 MODBUS communication 330mV current transformer input
Easywire Patented MRJ4M "Plug n Play" Din Rail Mounted Multi Function Energy Meter With Integrated Pulse OutPut & RS485/Modbus RTU - Single CT Connection
PQM4000: Class A DIN 192x144 power quality analyzer for CTs • Harmonics and interharmonics measurement• Data recording for further EN 50160 analysis• Data recorded in standard PQDIF and CSV file formats• Embedded web server• Communication on Ethernet, RS485 and WIFI• USB host port for data transfer• Integrated GPS for accurate timing• High resolution TFT...
- VdS, CE, DIBt approval- Built-in control unit (independent)- 2 alarm relays, 1 service alarm, 1 system error relay, 1 low flow relay, Modbus- Quick and easy installation.- Flow indicator with high sensitivity.- 4 installation positions 0, 90, 180 and 270 °- Test hole in the cover ◆ Needed Accessory Venturi Tube for smoke detection in ducts
Duotrak is officially included in the NRPP (National Radon Proficiency Program) list. Radonova is proud of this achievement and thus becomes a product that follows the measurement standards established by ANSI-AARST (American Association of Radon Scientists and Technologists) and is accepted to carry out radon measurements. Duotrak® provides a simple...
Solid core transducer. (does not open to insert the cable).Selectable amperage range:H721LC: 0 - 10/20 / 40AH721HC: 0 - 50/100 / 200AAnalog output: 4-20 mA, powered by external @ 12-30VDC Minimum Order: 2 Units
0-5 m/s, 0...+50°C 0-10 V, 4-20 mA LCD display, relay 5 scales per device
- 0-20 m/s, 0...+50°C, 0-200.000 m³/h - 0-10 V, 4-20 mA - LCD display, relay - 5 scales per device
New, completely revamped version Very thin coil diameter: down to 7 mm New connector design Accessory to secure the coil to the busbar Possibility to seal the locking of the coil
- Four selectable scales- Equalization and 90° shifting of the Rogowski coil signal- 1 A RMS full scale output for instantaneous value- Compact DIN rail enclosure- 85 ... 265 VAC power supply
AO-DA01 is a DIN-RAIL 1A Output Rogowski coil integrator installation in distribution box,in a plastic 1 module DIN-RAIL enclosure, powered directly from the mains.
- Rated input: 100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)- Rated output: 5A rms- Accuracy: ±0.5% (from 1% to 100% of rated )- Bandwidth: 30Hz to 5KHz- Power supply: 24VDC- Maximum Burden: 0.8Ω- Maximum power: 15W- Requires Rogowski Coils (not included)
The Rogowski coils must be connected to an electronic integrator for 90° phase shift compensation and frequency equalization: AO-S1 AO-D1 AO-S9
-40...+400°C PT100, PT500, PT1000 magnetic adhesive force 90 N
◆ The Mi550 handheld three phase power quality analyzer connects externally with open type Rogowski coils or voltage type CT's.◆ It is suitable for:- realizing non-dismantling wire tests- simplifying test steps- saving construction costs- engineering tests- inspection and maintenance of distribution systems
◆ Three Models: AO-SRC-50, AO-SRC-100 and AO-SRC-150 ◆ Window size: 100mm◆ Section : 12mm◆ Cable length: 2 meter◆ Calibrated Accuracy: ±0.5%(temperature drift:300ppm/C)◆ Ratio: 333mV/kA@50Hz◆ linearity: 0.2%(from 1% to 100% of rated )◆ Position error: ±1%
F3R Clip-on Ultrasonic Flowmeter With LoRa Communication For Reverse Osmosis Technology LoRa Ultrasonic Flowmeter F3R, Helping Reverse Osmosis Technology ◆ Reverse Osmosis◆ Pipe size range: DN20-DN80◆ Output: RS485, LoRaWAN communication◆ Screen display in 4 direction rotation◆ LCD color display screen