RTR-500MBS-A Mobile Base Station

RTR-500MBS-A

TandD

New

413,00 €

tax excl.

Add to wishlist

T&D's RTR-500MBS-A is a Mobile Base Station equipped with mobile network capabilities. 
The RTR-500MBS-A supports 3G and GSM networks. 
The RTR-500MBS-A enables users to setup remote or in-vehicle data collection via wireless communication, to automatically send data via mobile network. 
As long as the Base Station is within the mobile network coverage area, it can be used in any location where LAN connection is difficult. With the warning monitoring function, the RTR-500MBS-A Base Unit monitors Remote Units for user-set alarm warnings, and sends warning report mails via e-mail or SMS, enabling users to always stay in the know about changes in measurement readings.

 RTR-500MBS-A
Compatible Devices Remote Units: RTR-501 / 502 / 503 / 507 / 574 / 576 / 505-TC / 505-Pt / 505-V / 505-mA / 505-P
(Including L Type and H Type)
Repeater: RTR-500
Maximum Number of Registrations Remote Units: 20 units (*1)
Repeaters: 5 units x 4 groups
Communication Interfaces US:
<Mobile Data Communication> 
WCDMA/HSDPA: 850 / 1900 MHz
GSM/GPRS: 850 / 900 / 1800 / 1900 MHz
<Between Base Unit(s) - (Repeaters) - Remote Unit(s)>
- Wireless Communication (short range radio communication)
FCC Part15 Section247 / IC RSS-210 (Frequency Range: 902 to 928MHz, RF Power: 7 mW)
- Optical Communication (proprietary protocol)
(With compatible Remote Units except RTR-574 and RTR-576)
<Between Base Unit - PC> 
- USB Communication (For Setup)

EU:
<Mobile Data Communication> 
WCDMA/HSDPA: 900 / 2100 MHz
GSM/GPRS: 850 / 900 / 1800 / 1900 MHz
<Between Base Unit(s) - (Repeaters) - Remote Unit(s)>
- Wireless Communication (short range radio communication)
ETSI EN 300 220 (Frequency Range: 869.7 to 870MHz, RF Power: 5 mW)
- Optical Communication (proprietary protocol)
(With compatible Remote Units except RTR-574 and RTR-576)
<Between Base Unit - PC> 
- USB Communication (For Setup)
Wireless Transmission Range Approx. 150 meters (500 ft) if direct and unobstructed
Communication Time Data Download Time from Remote Unit (for 16,000 readings)
- Via wireless communication: About 2 min.
The same amount of time will be necessary for each Repeater.
Does not include communication time from Base Unit to server or e-mail.
External Alarm Input/Output Terminal(*2) <Input Terminal: Contact Input>
Internal Pull-up: 3V 100kΩ
Maximum Input Voltage: 30V
<Output Terminal: Photo Mos Relay Output> 
Voltage when OFF: AC/DC 50V or less
Current when ON: 0.1A or less
Resistance when ON: 35Ω
Communications Protocol SMTP (POP before SMTP, SMTP-AUTH <LOGIN>), SMTPS (SMTP over SSL), FTP, SMS (*3)
Power AA Alkaline Battery (LR6) x 4
AC Adaptor (AD-0605 or AD-05C1) (5V, 2A)
External Power Supply (DC 10-24V)
AC Adaptor (AD-0605 or AD-05C1)
Battery Life (*4) Expected battery life with only AA alkaline batteries:
Approx. 2 days under the following conditions (only one Remote Unit and no Repeaters, warning monitoring ON, downloading data once a day, sending current readings at a 10 minute interval)
Dimensions H 96 mm x W 66 mm x D 39 mm (excluding antenna)
Antenna Length (Cellular/Local): 109 mm
Weight Approx. 210 g (including batteries)
Operating Environment Temperature: 10 to 55 °C ( -10 to 55 °C with external power connected)
Humidity: 90 %RH or less (no condensation)
Accessories AA Alkaline Battery (LR6) x 4, Antenna x 2 (Cellular/Local), USB Mini-B Cable (US-15C), External Power Cable (BC-0302), Software (CD-ROM), Manual (Warranty Included)
GPS Interface (*5) Connector: SMA Male Plug
Power Supply: 2.5 to 2.7V
SIM Card (*3)(*6) Standard Size SIM Card (WCDMA or GSM)
  • *1: For RTR-574 and RTR-576, registration of one unit will be counted as two units.
  • *2: In order to use the external alarm terminal, please prepare a compatible connector: JST PAP-04V-S.
  • *3: SMS is required for some functions of the RTR-500MBS-A. If SMS is necessary, make sure that the contract you have with your carrier includes this service.
  • *4: Battery life varies depending upon multiple factors including number of warning reports sent, ambient temperature, frequency of communication, and battery performance. All estimates are based on operations carried out with a new battery and are in no way a guarantee of actual battery life.
  • *5: In order to use the GPS function (to attach geographical positioning info to current readings data), please purchase a compatible GPS antenna.
  • *6: Please prepare a contracted SIM card separately.