HY-DISPLAY is a powerful console with Embedded real-time operating system taht can work reliably and continuously, without garbage and redundancy. No worries about "system crash".This console is mainly for HongYuv sensors (for free), but it can also becustomized to fit your own 3rd party sensors (with an extra cost).
AO-RS2E radar precipitation detector has higher sensitivity and faster response than the traditional mechanical type when detecting start and end time of rain, besides, neither do you need to worry about obstruction such as leaves covered in the surface of the detector to interfere with rainfall detection, nor do you need to have heating device to prevent...
AO-RSS11E is a non-contact road surface state detector, thanks to remote sensing technology it’s taken, it can not only avoid damage to the road, But also traffic interference during its installation.Multispectral measurement technology enables accurate detection of thickness of ice, snow, water on surface of the road.
- AO-RSS12E/13E series non-contact road state detector adopts remote sensing technology to avoid road damage and traffic interference caused by the installation of road meteorological station.- Multispectral measurement technology can accurately detect the presence and thickness of ice, snow and water on the road surface, as well as real-time monitoring...
Ultrasonic 2D Anemometer is designed to simultaneously measure the 2-dimensional horizontal components of the wind speed and direction based on principle of TOF (time of flight) of ultrasonic sound wave.Low power chip make its power consumption low to 0.2W. Using ABS shell, Weight is lighter and Structure is more stable
AO-WDC6E is developed based on the basic version AO-WDC2E by integrating temperature, humidity, barometric pressure, and precipitation sensor. A more advanced model AO-WDC6SE has solar radiation, UV radiation, luminance and PM1.0/2.5/10
AO-WDS2DVSE Ultrasonic Anemometer for Davis VP 2 CE Approved
Robust design, the WDS6E is easy to install for continuous 24-hour monitoring.Maintenance-free operation: With no moving parts, the entire system is designed to be maintenance-free, ensuring long-term reliability.Advanced communication: MODBUS protocol with standard RS485/RS232 output.Optional upgrades: Capable of integrating additional modules such as an...
HY-WDC2THPE is developed based on AO-WDC2E by integrating temperature, humidity, and barometric pressure sensor, its specification refer to AO-WDC6SE. Weather station without shutter.
HY-WDC62E is composed of several sensors to measure wind speed & direction based on ultrasonic sound wave travel time difference in air,it has optional temperature, humidity and pressure sensors. - No moving or worn parts- Maintenance free, long lifetime- Adopts ultrasonic reflection probe make structure more compact- Powered by 3*18650 rechargeable...
HY-WDS2E Ultrasonic 2D Anemometer is a compact ultrasonic wind speed and wind direction sensor. It is designed to simultaneously measure the 2-dimensional horizontal components of the wind speed and direction. Using ABS shell, Weight is lighter and Structure is more stable. Build-in own intelligent heating module, It can work normally under the cold and...
AO-WDS63E Portable Automatic Weather Station is a professional weather station that can simultaneously measure air temperature, air humidity, wind speed, wind direction, air pressure, rainfall, UV and UV index, illuminance , PM1.0 / PM2.5 / PM10, Sea Level with MEMS sensor, GPS compass, etc.The real-time display include six data elements, which are...
AO-IRS2E is a compact infrared temperature sensor.The optical analysis system is installed in a compact aluminium shell.A 90° adjustable mounting bracket allows easy installation of the unit.It is designed for industrial, outdoor 7/24 monitoring. - Detecting surface temperature- Requires no slot-cut, easy installation- Low maintenance cost- Can be...
Connection to the ISS of the Davis Vantage Pro2 station through the RJ11 port.Includes solar panel power supply and mounting kit.