The AC-100 cable is required to download data recorded in Apogee handheld meters to a computer. The cable houses electronics to convert the signal from the meter into a USB signal that a computer may recognize.The Apogee AMS software (Windows compatible, XP and later; Mac compatible, 10.10 and later) used to interface Apogee meters with a computer is...
The AL-120 solar mounting bracket with a leveling plate is specifically engineered for the secure installation of Apogee Instruments' range of sensors, including pyranometers, pyrgeometers, quantum sensors, red–far-red sensors, PAR-FAR sensors, and ultraviolet sensors.
SHOPPING FOR QUANTITY, OR DO YOU WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our form More info about this product
The diffusion head is designed for soil applications with an oxygen sensor.The head keeps soil and debris clear of the sensor opening to ensure accurate measurements.
The "flow through head" is designed for laboratory applications where an oxygen sensor is used. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes.
◆ MQ-610 ePAR meter for scientists and serious growers.◆ The MQ-610 ePAR meter is the first in its class among leading scientists and serious growers for measuring accurately the new extended photosynthetically active radiation (ePAR) from 400 to 750 nm for all types of light sources.◆ It has been designed by the Apogee Instruments engineering team....
◆ The Apogee SQ-100X-SS PAR Light sensor is a self-powered, analog original quantum sensor with a 0 to 250 mV output.◆ The sensor features a rugged, self-cleaning sensor housing design, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to dataloggers and controllers.
Non-destructive Measurements The MC-100 measures the ratio of radiation transmittance from two wavelengths (red, strongly absorbed by chlorophyll, and near infrared, not absorbed by chlorophyll). This makes measurements non-destructive and nearly instantaneous (measurement times are less than 3 seconds).This allows rapid measurements on multiple leaves...
Bluetooth wireless µCache micro datalogger for unitary measurements with multiple sensors from Apogee Instruments. The "microCache" Wireless Micro Datalogger is a rugged (IP67), AA battery powered, single datalogger with Bluetooth wireless connection, and works with most sensors manufactured by Apogee Instruments.When used to record measurements in...
SHOPPING FOR QUANTITY, OR DO YOU WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our form More info about this product
The MQ-200 has a hand-held meter, attached via cable, that displays and stores measurements.The sensor head features a fully potted, domed-shaped design making it fully waterproof, weatherproof and self-cleaning. Quantum sensors are also used to measure PAR/PPFD in aquatic environments, including salt water aquariums where corals are grown.Typical...
The MQ-210 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware.The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings.The waterproof sensor...
Call +34 916292106 or complete our form More info about this product
The MQ-501 is designed to be an easy-to-use handheld meter for spot-check measurements.The meter includes the AM-001 meter mounting bracket to mount the sensor on a horizontal plane to the meter and approximately 0.17 m of cable to accommodate the bracket length.The full-spectrum sensor incorporates a blue-enhanced silicon photodiode and custom optical...
The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor dip effect correction factor to meter readings via firmware. The meter provides excellent measurements on all light sources, including LEDs.
DISCONTINUED The MU-250 has a hand-held meter, attached via cable, that displays and stores sensor measurements.The sensor detects UV radiation from 300 to 400 nm.Typical applications include monitoring the filtering ability and stability of various materials, measuring UV-A radiation in outdoor environments and laboratory use, and monitoring UV radiation...
The SI-121 is an unamplified analog sensor with a voltage output.The sensor has a 18° half-angle field of view and a response time of 0.6 seconds.Typical applications include plant canopy temperature measurement for use in plant water status estimation, road surface temperature measurement of determination of icing conditions, and terrestrial surface...
TYPICAL APPLICATIONS• Measurement of O₂ in laboratory experiments or of O₂ gradients in soil/underground• Monitoring gaseous O₂ in indoor environments for climate control, in compost piles, and in mine tailings• Monitoring redox potential in soils• Determination of respiration rates through measurement of O₂ consumption in sealed chambers
The SP-110 is a self-powered analog sensor with a 0 to 400 mV output.
The SP-214 is an amplified, analog sensor with a 4 to 20 mA output.The sensor incorporates a silicon-cell photodiode with a rugged, self-cleaning sensor housing design. BUYING IN BULK, OR JUST WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our More info about this product form
The new SQ-420 is a stand-alone PAR sensor/datalogger with 10,000 measurement internal data storage that can be uploaded to a computer. If continuously connected, the software graphs real-time PPFD (Photosynthetic Photon Flux Density) 4 YEAR WARRANTY
Buying in quantity or just want some useful advice?Call +34 916292106 or complete our form More info about this product.
The SS-120 measures a wavelength range of 635 to 1100 nm.The spectroradiometer is an easy-to-use, cost-effective, versatile spectral measurement system that can be interfaced to a computer.