Catalog
Loading...
fuentes RSS
No RSS feed added
CHOOSE WEATHER STATION ACCESSORIES:
Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field.
- 4 channels Wireless Smart Datalogger- Up to 4 inputs for vibrating wires (500÷4000 Hz) and up to 2 transducer temperatures- Respectively configurable inputs (2+2, 3+1, 4+0)- Type "C" lithium internal battery for a battery life up to 4 years with 4 vibrating wires and samples every 60 minutes- IP 65 sealing.
Accessory kit for powering MWDG-GSM gateways through solar panel for open field applications without mains power supply support - Supplied with photovoltaic panel, rechargeable lead-calcium battery and 6A charge controller - IP68 protection degree.
Modular Wireless Datalogger Gateway - Data gathering, storage and export gateway- Manages up to 50 wireless probes/dataloggers storing up to 2,500,000 samples- Equipped with external WSN and GSM antennas- Provided with RS485 with MODBUS RTU protocol and internal GSM module for point-to-point connections and GPRS for connection to the www.winecap.it...
Modular Wireless Datalogger Gateway- Data gathering, storage and export basestation- Manages up to 50 wireless probes/dataloggers storing up to 2,500,000 samples- Equipped with external WSN antenna- Provided with RS485 with MODBUS RTU protocol and LAN port for www.winecap.it Service Center connection and for remote reading using RTU ModBus over TCP....
This bracket is required for mounting HOBO MX2301 and MX2305 loggers in either an RS1 or M-RSA solar radiation shield.
This clamp allows the U23-001 or U23-004 to be mounted in the M-RSA radiation shields.It is NOT required for use with other HOBO Pro v2 models.
The SRH1A Humidity and Temperature Sensor is a highly accurate and cost effective probe with robust POM-C enclosure. It has been prepared for outdoor and indoor environments. Can be used with Wind2measure RADIO Data Logger or integrated with other manufacturers’ equipment.
11-shade protector for solar radiation (anti-UV) and rain.The AO-95-01 Solar Radiation Shield includes: radiation shield, bracket and U-bolt.Includes anchors for mast or wall. Sensor not included.
The AL-120 solar mounting bracket with a leveling plate is specifically engineered for the secure installation of Apogee Instruments' range of sensors, including pyranometers, pyrgeometers, quantum sensors, red–far-red sensors, PAR-FAR sensors, and ultraviolet sensors.
Transport your weather data and bring back to your host PC. Use with Software Spec 9 to offload to your desktop PC.
Replacement cover for the ODOS-5000 sensor. The only part that can suffer wear - the sensor cap is robust and simply interchangeable with 24 months warranty.
For mounting into a probe holder the sensor can be deliveredoptionally with a 1” process connector.
Vertical Linear Power SuppliesPlugs directly into socket for Europe 2-pin femaleUnregulated outputsInput 230 Vac 50 HzOutput cable of 1.8 meters (approx.) With positive center output connector 2.1 x 5.5 x 9.5 mmClass II - double insulation
WatchDog 1000 Series Sliding Enclosure Water resistant - mounts to pole or post. For 1000 Series Only.
Compatible with HOBO weather stations, HOBOware, and HOBOlink, this 0.01" rain gauge sensor features a plug-in modular connector for easy installation; requires no programming or extensive setup.
Radiation Shield for the WatchDog 1000 Series Micro Stations and the WatchDog A-Series Data Loggers. Protect your Micro Station or A-Series data logger from rain and measurement-distorting solar radiation.Works with WathcDog 1000 Series Micro Stations and WatchDog A-Series Loggers only.
Apogee Instruments model AM-220 mounting bracket is recommended for mounting the sensor to a cross arm or pole.It allows the adjustment of the angle of the sensor with respect to the target and accommodates the radiation shield designed for all Apogee MI series infrared radiometers.
■ Model: TL-5955 (2/3AA)■ Voltage: 3.6V, Capacity: 1650mAh■ Size: 1.4cm x 3.35cm (0.571" x 1.319")■ Chemistry: Lithium Thionyl Chloride (Li-SOCI2)■ Nature: Non-rechargeable disposable lithium battery
It is designed to accurately measure cloud base height and vertical visibility using the LIDAR principle. It can detect up to four distinct cloud layers, providing valuable information about their composition and height.
◆ Automatic collection and measurement of cloud base height◆ Can measure up to three layers of clouds◆ It can measure the inclination in two directions and the distance of hard objects◆ Self-check function◆ Automatic protection◆ Historical data storage