Catalog
Loading...
fuentes RSS
No RSS feed added
These Reversible Membrane Electrode Assemblies (MEA) AO-1141018 can be used as in an Electrolyzer for Hydrogen production or in Polymer Electrolyte Fuel Cell (PEMFC) for electricity production.
Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low-temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation.Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)
Anode supported bi-layers (AEB) are a great starting point for researchers wanting to work on low temperature cathode materials. The AEB offers a ceria interface for the cathode layer to prevent zirconate formation. Perfect for use with perovskite cathodes. (Minimum quantity: 5 units)
Single electrode button cells use Nexceris’ patent pending high strength, highly conductive HionicTM electrolyte support combined with the NextCellTManode system on one side.This gives researchers a perfect tool for testing anode systems on a very consistent platform. Single electrode button cells come in two standard support sizes, each with a 12.5 mm...
Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. (Minimum quantity: 5 units)
Anode supported cells (ASCs) with the Ni-YSZ/YSZ/GDC/LSC is a great starting point for intermediate temperature (below 800°C) SOFC research and development. Using an ASC you receive an optimal balance of membrane and ionic function by using a very thin electrolyte. Note: The 20mm diameter are for each part of the round button cell, and each cell has an...
With progressive performance over several years, the NextCell button cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the device and the cathode, and for the calibration of the test device.
With progressive performance over several years, the NextCell button cell has become a standard used by SOFC researchers around the world. It is used as a reference cell for the development of the device and the cathode, and for the calibration of the test device.
Ceramic oxide powders: Standard quantities between 100 g and 10 kg are available. Other quantities are upon request.
Construct your Own Fuel Cells 5L MEA 5cm2 & 10cm² 5 Layer Membrane Electrode Assembly with GDL for use in hydrogen air/oxygen fuel cells.
CT is a woven carbon cloth with a Microporous Layer (MPL). It has a total thickness of 410 um (microns). CT is a great low-cost alternative to conventional woven carbon cloth Gas Diffusion Layer (GDL) materials.
The ELAT Hydrophilic Plain Carbon Cloth gas diffusion layers are excellent for flow batteries.The excellent tensile and interlaminar shear strengths prevents fabric wrinkling.Hydrophilic ELAT is designed specifically for liquid type electrochemical reactors.The thickness of this GDL is 406 um.
These Hydrogen Air MEAs are 5-Layer Membrane Electrode Assembly (MEA) with integrated Gas Diffusion Layers (GDL) for use in Hydrogen/Air Fuel Cells.
5 Layer Membrane Electrode Assembly with GDL for use in hydrogen air/oxygen fuel cells. AO-MEA-5L
XICAT™ Membrane Electrode Assemblies (MEA) are highly durable and they provide ultra-high performance assemblies for use in electrochemical applications due to the use of ultra-thin composite membranes.
Methanol (MeOH) can be utilized directly (without the need for a reformer) with Direct Methanol Fuel Cell (DMFC) Membrane Electrode Assemblies (MEA).It also allows a liquid fuel to be used directly in a fuel cell instead of a gaseous fuel.