fuentes RSS
No RSS feed added
Wheather Stations for the study of meteorological phenomena and climatic changes.
Measures global and diffuse radiation Sunshine duration No moving parts, no shade rings PAR reference sensor for SunScan System Outputs can be PAR (mmol.m-2.s-1), Energy (W.m-2) or Lux
AO-200-02 Quantum PAR Sensor , Photosynthetic Active Radiation SensorCertification: CE-EMC, CE-LVD, RoHS, ISO9001 7 RS485 Units in stock for immediate delivery!
Equitensiômetro: Sensor de Potencial Matricial de Solo
► Scattering Radiometer► Spectral range: 280-3000nm► Power Supply: 12-24VDC► Range: 0-2000W/m2► Output: 0-5V,4-20mA,RS485► Sensitivity: 7-14μV*W-1*m2► Latitude scale range: 0~50°N or S► Red latitude: ±25°► Ring diameter: Φ400mm► Accuracy: <±2%
Conforms to the WMO Standard Suitable for harsh environments Adequado para ambientes extremos High Sensitivity Easy Installation
Certification: CE-EMC, CE-LVD, RoHS, ISO9001
Temperature Transducer.: PT 1000 class "A" The PT1000CNT is a temperature transducer to acquire surface temperatures.The class “A” PT1000 sensible element is made by a brass block, meanwhile the cable insulation is realized in poly-propylene for the conductor an in thermoplastic rubber (TPE) for the secondary insulation.
3 channels Wireless Smart Datalogger- Interface module provided with 3 inputs for wind speed, direction and solar radiation- Type "C" lithium internal battery for a battery life up to 5 years with samples every 10 minutes- IP 65 sealing (to be used with AN6410 and ANS-RSG-B transducers).
Precision Electronic Tensiometer for precise water potential measurements in the laboratory.The only Precision Electronic Tensiometer for use in the laboratory and with scientific quality.Easy to install, the TEROS 31 Electronic Tensiometer has an accuracy of ±0.5 kPa, offering accurate and representative water potential measurements.Responds to changes...
Certification: CE-EMC, CE-LVD, RoHS, ISO9001 AO-600-07 Data Logger includes Data Acquisition, storage, transmission and management, and many other functions.
This bracket is required for mounting HOBO MX2301 and MX2305 loggers in either an RS1 or M-RSA solar radiation shield.
This clamp allows the U23-001 or U23-004 to be mounted in the M-RSA radiation shields.It is NOT required for use with other HOBO Pro v2 models.
AO-WDS2DVSE Ultrasonic Anemometer for Davis VP 2 CE Approved
Two wires class "A" PT1000 for cryogenic use► Stainless steel finger Ø 6x50 mm► Complete with 2 meters teflon shielded cable► Operating temperature -200÷150°C.
Turn any analog sensor into an SDI-12 compliant sensor using the SDI-12 Sensor Translator.This small but powerful device will sample any analog, or one wire sensor and interface it to the SDI-12 bus.It handles all of the complex SDI-12 protocols, it is simple to use, and is inexpensive to implement in production units.
Replace your expensive data logger, and turn your PC into an affordable SDI data logger with the SDI-12 to USB Protocol Translator board.Plug in the board into a USB port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.
Replace your expensive data logger, and turn your PC, modem or wireless interface into an affordable SDI data logger with the SDI-12 to RS232 Protocol Translator board. Merely plug in the board to a RS232 port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.
FEATURES Real-time temperature measurement Good corrosion resistance, suitable for all kind of soil and water. High accuracy Good linearity All stainless steel probe
Anemometer-Thermometer Data Logger for air speed measurement which use hot-wire or vane probes, for temperature Pt100 sensor with SICRAM module.
AST.1 telescopic shaft or AP471S1.23.6 / AP471S1.23.7 fixed extension shafts available on request.2 m cable.Probe complete with SICRAM module.
HD9007 Solar radiation shield is suitable to protect temperature and RH/temperature sensors used in weather stations from solar radiations, rain and wind.
Atmospheric pressure transmitter. Outdoor, indoor use. Barometric pressure transmitter for outdoor and indoor use.Display reading and pressure output is user selectable in these units: hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2.