fuentes RSS
No RSS feed added
electrodes
This glass-body, refillable pH electrode 6367-10D with temperature sensor has a sleeve junction for improved stability and repeatability. Ideal for highly accurate pH measurement
- The flat platinum sensor at the tip allows measurement of low-volume samples- Waterproof- Combination electrode
Conductivity Electrode (with 1m cable, BNC and phono jack)
Conductivity Electrode (with 1m cable, BNC and phono jack)
Conductivity Electrode (with 1m cable, BNC and phono jack)
Conductivity Electrode (with 1m cable, BNC and phono jack)
Conductivity Electrode (with 1m cable, BNC and phono jack)
Conductivity Electrode (with 1m cable, BNC and phono jack)
Conductivity Electrode (with 1m cable, BNC and phono jack)
Conductivity Electrode (with 1m cable, BNC and phono jack)
DO Electrodes (with 1m cable unless otherwise stated, BNC and phono jack - not applicable for replacement tips)
DO Electrodes (with 2 m cable unless otherwise stated, BNC and phono jack - not applicable for replacement tips)
DO Electrodes (with 10 m cable unless otherwise stated, BNC and phono jack - not applicable for replacement tips)
Very durable minimum alkali errors. Most widely used for general pH measurements.
Uses a glass membrane highly sensitive to lowconductivity water and nonaqueous solvents. Can also be used for ordinary pH measurement.
Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.
Conductivity/Salinity conditioning solution 6 x 14 ml
E3 Series Fixed-Disk RDE tips featuring a 12.0 mm OD PTFE from Pine Instruments
This refillable pH electrode with integrated temperature sensor is ideal for testing samples in large containers and long test tubes (e.g., microbial culture fluids) due to its long, thin, glass-body.- Electrode: 283mm length, 8mm diameter- Constructed with responsive glass that is 10x stronger than JIS standards- Waterproof, Pb-free glass
This refillable pH electrode can measure samples in very slender test tubes (e.g., NMR test tubes) due to its long, thin, glass-body. - Electrode: 291mm length, 3mm diameter- Waterproof
This plastic-body, refillable pH electrode is recommended for general-purpose use. Previous model: 9621-10D
The glass membrane of this glass-body, refillable pH electrode with integrated temperature sensor, is highly sensitive to low-conductivity samples and non-aqueous solvents.
The needle tip of this glass-body, refillable pH electrode with temperature sensor allows measurement of food samples and aqueous solutions.