7-inch screen, waterproof. 3.5 MHz convex probe. - Excellent total weight (including battery): no more than 950g.- Very portable handheld work- Good shell reinforcement design: the product adapts to farm and wild & rugged working environments.- Excellent display technology allows image display performance to adapt to both weak light and bright light.
Ultrasonic 2D Anemometer is designed to simultaneously measure the 2-dimensional horizontal components of the wind speed and direction based on principle of TOF (time of flight) of ultrasonic sound wave.Low power chip make its power consumption low to 0.2W. Using ABS shell, Weight is lighter and Structure is more stable
AO-WDC6E is developed based on the basic version AO-WDC2E by integrating temperature, humidity, barometric pressure, and precipitation sensor. A more advanced model AO-WDC6SE has solar radiation, UV radiation, luminance and PM1.0/2.5/10
AO-WDS2DVSE Ultrasonic Anemometer for Davis VP 2 CE Approved
AO-WDS2THPE is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor, its specification refer to AO-WDS9E.
AO-WDS65E, Compact Bluetooth Weather Station for easy mounting on vehicles. AO-WDS65E is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor, compass and GPS module.
Zone Pressure Sensor (ZPS), ±0.25%, 4-20 mA, 0-5" WC Static Pressure Tube Included & LCD Display - Field-selectable ranges and output signals - Five direct and five bidirectional standard ranges - 4-20 mA, 0-5 VDC, or 0-10 VDC output signal - Inches of water or Pascal engineering units - Optional large LCD display - Microprocessor...
This flowmeter can be virtually applied to a wide range of measurement. A variety ofliquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw High accuracy.Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than +-1%.Wide measuring range: Several types transducer for selection, pipe size from...
◆ Simplest and most basic set for beginners.◆ Compatible with Arduino IDE.◆ Included Tutorial in Spanish.◆ Includes PDF introduction manual to projects.◆ Supplied with code and examples to save searching time.◆ New UNO R3 development board, USB cable and basic components.
Sensor readings on your SmartPhone ZSC Bluetooth SIS - Sensor Interface - stereo
5 Layer Membrane Electrode Assembly with GDL for use in hydrogen air/oxygen fuel cells. AO-MEA-5L
This 2.0mg/cm² Platinum Ruthenium on Carbon Paper is the most popular Gas Diffusion Electrode (GDE) for use in Direct Methanol Fuel Cells (DMFC).The Platinum Ruthenium (PtRu) catalyst is designed to facilitate the Methanol reaction to create an efficient DMFC.
Infrared Thermometer with Laser Targeting -40°C to 650°C
AO-WDC6SE is our most advanced Mini Automatic Weather Station and can simultaneously monitor multiple optional meteorological parameters: temperature, humidity, wind speed and wind direction, air pressure, precipitation, solar radiation, luminance, PM.These optional parameters can be chosen in the "Select Model" tab. Outputs: (RS485 or RS232 or SDI-12)
- Incutex brand hand crimping tool for RJ45 / 11, 8P8C, 6P6C and 4P4C1 Network connectors.- Ratchet pliers- Crimping tool
CT is a woven carbon cloth with a Microporous Layer (MPL). It has a total thickness of 410 um (microns). CT is a great low-cost alternative to conventional woven carbon cloth Gas Diffusion Layer (GDL) materials.
AO-DA01 is a DIN-RAIL 1A Output Rogowski coil integrator installation in distribution box,in a plastic 1 module DIN-RAIL enclosure, powered directly from the mains.
The DMFC MEA is often useful in lower power applications. The DMFC MEA is a 3-Layer configuration, also known as Catalyst Coated Membrane (CCM).
Methanol (MeOH) can be utilized directly (without the need for a reformer) with Direct Methanol Fuel Cell (DMFC) Membrane Electrode Assemblies (MEA).It also allows a liquid fuel to be used directly in a fuel cell instead of a gaseous fuel.